Welcome to Fixya
If you remove any adjusting screws or jets, write down the number of turns it takes for removal and than put each one back the same number of turns.
Before removing the
carbs, drain them (assuming there is anything in them). Get a spray can of
Berrymans carb cleaner (or another brand), and fill the float bowls full of cleaner by disconnecting the
fuel lines and spraying into each fuel line until the level in the line is reaching the top of the float bowl. Wait for a couple of days while the cleaner softens the
dried varnish residue in the
carbs. Now remove the
carbs as a set then dis-assemble and clean with a couple more cans of cleaner.
Below is a diagram of your
carb. The same diagram with the entire
carb assembly AND your entire bike can be found at Babbitt's.
Go to the site below where you can see a parts diagram for your specific bike. You will select the actual brand, year, model, etc., once you go to the site. Part numbers and prices are also shown. You can order parts from this site. In the event no price is shown on a particular part, the part is not in stock. www.babbittsonline.com/pages/parts/viewbybrandand/parts.aspx
Thank you for using Fixya!
If you need further help, reach me via phone at
https://www.6ya.com/expert/elixirjose_00375ea24bd8141b