At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The engine produces oil pressure from the resistance(clearance ) between the bearings and crankshaft and the sending unit lets you know when there is no pressure. These switches ground the light in the dash around 5 psi. So as the engine gets warmer then the oil gets thinner with large amounts of clearance pressure drops. Test system with mechanical unit normal hot idle pressure should be 30-45 psi if low raise idle speed comes up then engine bearings are worn.
Hello! The DTC P0016 inidicates a cranskshaft and camshaft misalignment. If you only replaced the camshaft position sensor - you may need to replace the crankshaft position sensor - which is located at the top where the engine and transmission connect.
Hope this helps and good luck! Thanks for using FixYa!
×