Question about Acura Vigor

Open Question

Installing automatic transmission on a 92 Acura Vigor and the shaft leading to the transmission from the differential. How do I line up the shaft into the differential, being that there is no indication in the grooves itself.

Posted by on

Ad

5 Suggested Answers

Anonymous

  • 5 Answers

SOURCE: 1992 Acura Vigor dashboard gear indicator blinks

TRY WHAT THAT OTHER PERSON SAID. IF THAT DOESNT WORK POP UR HOOD OPEN AND SLAM IT DOWN. ONE OF UR SENSORS ARE DIRTY OR LOOSE SAME THING HAPPENS TO MINE.

Posted on Feb 19, 2009

Ad

Anonymous

  • 2 Answers

SOURCE: 1994 acura vigor has abs and brakes lights on while driving?

Check for brake fluids and make sure all the brake fluid container is closed tightly. Also, you make have to bleed the brakes.

Posted on Mar 21, 2009

Ad

Anonymous

  • 1 Answer

SOURCE: location of fuses for 92 acura vigor

they are below the driver side kick panel. It has a round latch turn over clock wise and pull cant miss it. Also there is another fuse box in engine compartment by the battery it has a cover pull it off.

Posted on May 19, 2009

emissionwiz

Marvin

  • 85223 Answers

SOURCE: location for fuel pump on a 92 acura vigor

the fuel pump is inside the gas tank.

Posted on Jul 08, 2009

Frank Frank

  • 16 Answers

SOURCE: 1994 acura vigor

The front brake rotors are press fitted to the front wheel bearings and are removed from the car with a special tool (puller) or can be seperated by removing the whole assembly and placing it in a press to seperate them. You may damage the bearing if not done right.

Posted on Aug 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does the engine come out from the top or bottom on a 92 acura vigor also what other cars have the same engine that will fit


This engine comes out with the trany from the top, as far as engines i think a few are interchangeable from acura.

Aug 30, 2010 | 1992 Acura Vigor

2 Answers

92 acura vigor clutch replcd still wont go in gear


Is all the air bled out of the hydraulics??

I would then suspect a faulty clutch component.

Was it like this before the overhaul??

Mar 10, 2010 | 1992 Acura Vigor

1 Answer

1992 Acura Vigor GS: Stabilizer bar link bushings.


The dealer should have the replacement bolts such as Delray Acura or go to a wrecker that has a 92-94 Vigor, they're all the same.

Sep 06, 2009 | 1992 Acura Vigor

1 Answer

Location for fuel pump on a 92 acura vigor


the fuel pump is inside the gas tank.

Jul 08, 2009 | 1992 Acura Vigor

1 Answer

Location of fuses for 92 acura vigor


they are below the driver side kick panel. It has a round latch turn over clock wise and pull cant miss it. Also there is another fuse box in engine compartment by the battery it has a cover pull it off.

May 18, 2009 | 1992 Acura Vigor

1 Answer

92 ACURA VIGOR


When you changed the joint, I'm assuming you had the shaft out. A common problem occurs when you put the shaft back in, it doesn't fully seat in the transaxle and then the differential is only connected to one wheel so it can't transmit power. You will have to disconnect the lower ball joint again, move the lower control arm down a bit, so that you can push the axle into the splines of the transmission.

Mar 08, 2009 | 1994 Acura Vigor

1 Answer

1992 Acura Vigor transmission removal


The D in the dashboard keeps on flash on and off? When that happens the engine does not change gears properly. What can that be
?

Jun 10, 2008 | 1992 Acura Vigor

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...