At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check for a switch on the top of the brake pedal lever. Sometimes the brake lights will not work if this is the problem.
This safety switch gives a signal that your foot is on the brake. It allows the starter to crank. The starter will not crank without this signal. It is often hit by the Drivers feet.
I will try to give you 2 sets of senarios depending on whether it cranks over or not.
There is a safety switch on the Brake pedal which sends a signal to the Brake lights and a starter circuit. If the Brake lights do not light up with a foot on them, then a starter signal will not go through either.
Look under the Driver's dash for the Brake switch on the Brake pedal lever. It could be broken of pushed out if place.
Cranks but no start. The Inertia switch is common problem. It can be located in the trunk or behind the kick panels of the front floor. It has a reset button to push.
Loss of fuel pressure. After checking the Inertia switch if you still have no fuel pressure the pump may be bad.
Now there are other reasons like a dead battery, bad starter, etc.
We need more details to supply additional answers.
Yes there is a starter relay in the wiring diagram. The yellow and lite blue wire goes from the starter solenoid to the relay. There is a yellow wire from the relay to a 30amp fuse. The key switch powers thru the neutral safety switch and then powers the relay on.
if u a fuel cut off switch. check to see if u have fire at switch. pwr from fufuel pump comes from the fuel cut off switch. check your owners manuel for location
You need to first load test the battery then do a voltage drop test on the battery cables. If you have never done a voltage drop test just google the procedure
×