At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Sometimes it will start normally and sometimes the engine kicks and shuts off and when it starts normally and i put it in gear it shuts off i have taken it to a dodge dealership to run an OBD scan and it says i need to replace my NAP sensor and i dont even know what that sensor is used for and where its located can u please help me with my problem THANKS ALOT
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
98 and 99 intrepid was manufactured with weak fuel pumps causing them to vapor lock try pouring cool water on the fuel rails on the intake to calm vapored gas then try to start it. Even the temp gauge at half way mark is probably still low on coolant causing engine to be warmer than normal causing the vapor lock to fix this problem replace the fuel pump with a 2000 or newer intrepid fuel pump that carries a little higher psi to prevent vapor lock from reoccurring this pump is compatible with your 98 it will plug right in
There are two types of alarm that was put in for Dodge and Chrysler depending what type you have I will give you the easy defeat.But first The BCM (Body control moduel) goes crazy why dont you try this method first. Roll down the window. Put the key in the ignition .Disconnect the battery negative post and positive and put them together for 2 minutes, then reconnect the positive first then the neagative.Then turn the key to the ACC position but do not crank the engine. leave for two minutes. Then see if that start the vehicle. I
make sure you have spark, sometimes if you start bypassing stuff the ignition works only on a resistor to much electricity and it won't work, not enough and it won't work.
If your talking that engine won't crank over, just click or something randomly, make sure shifter is all the way in park, or try in neutral, otherwise start relay would be another suspect area. Worse case, starter.
×