At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
03 town and country front washer pump is not working, tried putting new one in and it does not work either. I know the fuse is good because the rear washer and all windshield wipers work
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
use a cheap probe type 12V tester and check the output at the plug on the washer pump motor when the wash button is pushed. If you have power to the plug then the washer pump motor is bad or poor electrical connection. If no power to the plug then the multifunction switch may be bad. either way about $50 in parts from rockauto.com
In my experience i would say its the pump. But if you look in your owners manual there will be a fuse diagram. From there you can check the fuse. Also if you know where the fuse boxes are located you can look on the backside of the lid that closes the fuse box there is a diagram. That will help you locate the fuse. If you need further assistance please let me know. Thanks, Midwest-tek
Likely, the pump/motor for the rear window (which is located under the front washer bottle is not being turned on, or is stuck for whatever reason. Remove the exit hose from the pump and blow through it with LOW pressure air to see if fluid and air exit from the rear washer fitting. Both motors are controlled directly by the Body Control Module (another computer besides the PCM) and are not fused individually. Each motor receives 12 volt power to it when commanded to run. Hope this helps!
×