2009 Dodge Challenger Logo
Anonymous Posted on Jun 25, 2011

I need to know which fuse number for lights - 2009 Dodge Challenger

1 Answer

AbdulSamad AL Balushi

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

New Friend:

An expert that has 1 follower.

  • Expert 146 Answers
  • Posted on Jun 25, 2011
AbdulSamad AL Balushi
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

New Friend:

An expert that has 1 follower.

Joined: Sep 09, 2010
Answers
146
Questions
0
Helped
52750
Points
500

Turn Signal (Right) white/tan (F), white/yellow (R) + TIPM, green 16 pin plug, pin 3; green 26 pin plug, pin 4
The TIPM (Totally Integrated Power Module) is in the engine compartment, on the passenger side fender.

Headlight white/brown -1.2K ohms [2009 = same] headlight switch or instrument cluster, gray 26 pin plug, pin 3
AutoLights same as headlight
Reverse Light white/lt. green + [2009 = same] passenger kick, harness to rear
Left Front Door Trigger purple - [2009 = VIOLET] driver kick or instrument cluster, white plug, pin 3
Right Front Door Trigger purple/white - [2009 = VIOLET/white] pass kick or instrument cluster, white plg, pin 16

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Need to know the fuse number of check engine light for a 1997 ford ranger. Can’t find it on diagram

I don't definitely know the answer but I strongly suspect there is no fuse for the engine check light as the light is switched on by the engine management computer if it detects a problem and it would defeat the purpose of the light if it was possible to kill it by removing a fuse.
1helpful
1answer

I need to chane the fuse for the check engine light. The fuse box has a diagram but doesn't state which fuse goes with which feature. I need to know what number is it.

Simply disconnect the battery there no fuse for a check engine light the light come on by the computer see something wrong because it doesnt start or you simply want to remove the light
0helpful
2answers
0helpful
1answer

Dash lights problem

open the hood on right hand side in the back of the battry there is a black box the fuse is in their look on back cover and your number should be number 15 fuse
1helpful
1answer

Need the fuse for the Licence Plate lights on my chevy s10 but I don't know what fuse number it is

These lights would not be individually fused, they are part of the running lights, something else is the issue. Look for bulbs, wiring and grounding issues.
1helpful
1answer

I need to know what fuse to check for my reverse lights and cigarette lighter? Where are they located

the backup lights and cigar lighter are located in under hood fuse box on drivers side of vehicle. both are mini fuses.the fuses have a number diagram to find them. backup lights are #42 and cigar lighter is #34
0helpful
1answer

Fuse location for Dashboard light in 1998 Nissan Frontier XE 2WD . The Manuel and Fuse Box Covers don't help at all. Entire Dash lighting is out, other dash features work fine.

Fuse Number 39 10amp fuse Color Red.
Fuse Number 11 10amp fuse Color Red
This illuminated your dash (cluster)

Let me know if this help you.
Check with test light.
0helpful
1answer

Turn signal lights are not working...

read your owners manual, go to the back of the book and then look for fuses, go to page and the book should tell you every thing you need to know
1helpful
1answer

1998 nissan maxima fuse location

bacon79: inside the car, in front of your left knee in the fuse block you are interested in looking at.
Remove the cover. You will see 3 rows of "ATO" type fuses arranged in a vertical fashion.
Often they will put a number to the right of the fuse.
In your specific case, you are interested in the center row of fuses.
Look at the top fuse which should be a 7.5 amp and the number next to it should be "26". Anyway, if you remove this fuse and look through it, it will either be burned through the center, have a hairline crack, or be solid. If it is the later and the dome light doesn't work, let me know and I'll see if I can help you.
Not finding what you are looking for?

285 views

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...