97 FORD CONTOR NO BRAKE LIGHTS INSIDE REAR WINDOW BRAKE LIGHT WORKS,SIGNALS WORK EMEGENCY WORKS TOO ,BUT NO BRAKE LIGHTS. HELP!

brake lights not working - 1997 GMC Jimmy - RepairPal

repairpal.com > Questions > GMC > Jimmy > 1997 GMC Jimmy

Jan 11, 2011 - hi about 2 days ago i realized my brake lights were not working but my turn signal lights were working and parking lights as well but no brake ...

Tail Lights don't work but third brake light does, not fuses ...

answers.edmunds.com > Edmunds Answers

Sep 23, 2009 - 97 GMC Jimmy 4x4 blinkers work, reverse lights work, above window ... I just lost hazard lights and rear brake lights, they were working 2 days ... If it is a frayed wire or solder point, then you can repair it, but not any worn contacts. ... Does anyone have any suggestions on 1997 Honda Accord tail & brake lig.

Brake lights /rear hazard lights not working - Ford Truck ...

www.ford-trucks.com > ... > 1967 - 1972 F-100 & Larger F-Series Trucks
Jul 9, 2010 - After checking the brake lights I tried the emergency flashers and found that they are working in the front but not in the back. I do have rear turn ... 1995 F350 Brake Lights / Turn Signals not working
Jul 9, 2012
Turn Signals and Brake Lights Do Not Work
Mar 10, 2012
Turn Signal, Brake Lights, & Rear Hazard not working
Aug 3, 2010
Rear Turn Signals, Hazards and Brake Lights not working....
Aug 29, 200

I have to think the problem is inside the turn signal switch, a poor internal connection. You know the brake signal first goes through the turn switch before it goes to the bulbs. That is why the brake lights and rear turn signal lights share the same filament in the bulb, and the same wire going to those lights. The only difference is the turning side light is affected by the turn signal flasher, causing blinking, while the other side- the non turning side-does not go through the flasher relay, but straight to the bulb from the turn signal switch. Change your turn signal switch and I believe you will solve the problem. Let me know, okay?

sounds like a wiring loom connector may have come apart as affecting all rear lighting trace loom back from light cluster to see if all are connected properly

it all points to a fault with a common ground. Find earthing points

check relay in fuse block under hood

If your brake lights and turn signals are out, you most likely have a blown fuse, burnt bulb, or a problem in the steering column.----------------------------------------------------------------------
digimaster iii

OK try this turn the signal light on one side or the other then push brake pedal if brake lights come on replace the turn signal switch

brake lights won't work, but the center does ??? u need to change your turn signal switch which is in the steering wheel. i changed mine and it worked great .....


hope that helps
s2g1

you need to replace the multi-function switch (directional switch) easy to do they cost about $60