Firts you need to check the fuse for your instument light and if it good check the connections to the cluster for a loose connection. The fuse should be in the compartment under the hood. You might also try starting the van and very slightly turn the key backwards to the run position to see if they work then. There has been an issue with ignition switches and this problem before. You might also try turning the key on and waiting a few seconds for the dash lights to go off then start it, there may also be an issue with a circuit board for the dash and this helps re set the PC board instrument panel controller. It's behind the instrument faceplate
282 views
Usually answered in minutes!
×