At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
ya there not easy when I do lines I have to cycle the abs motor a lot to get air out you will need a scan tool to do it at home I use my old snap on one
It's so much easier to hook up a scanner to read the ABS codes than trying to guess, the brake lite comes on when the fluid is low or your e-brake is on, only takes one click to activate the light.
Wheel hub bearing . When the ABS see's a problem will disable traction control an ABS an will turn on RED brake light as well . Fluid level has nothing to do with it .
SERVICE STABILITY
Refer to ABS Description and Operation in Antilock Brake Systems
do not replace only the bearing. replace hub assembly. remove rim/tire , remove caliper, mounting plate, rotor. . un bolt hub assembly, unplug abs. remove front axle nut if 4x4. you may need to rent the axle nut remove kit and hub puller. pull out hub. drive axle reward out of hub. install new part. do not torque hub over 90lbs. check with parts sell for spec
you have to fix the problem with ur brakes- first check the wiring ,connectors and connection clips to the abs sensors and modulator if looks ok than have truck scanned some auto stores such as auto zone / advanced auto do it for free the code will give u a start point towards fixing ur problem--visual inspection of brakes doesnt always show problem
remove belt drain radiator remove fan shroud remove fan /pulley remove top hose on water pump and lower hose un bolt water pump remember mark bolts because lower longer need sealant due to they go into water jacket remove and clean around both water openings before setting in place hook up upper bypass hose easier to hook up before install--replace and rebolt everything
The dealer will charge you $1300 - $2000. Contact Module Masters. They are great to deal with. You have to ship it to Moscow, Idaho. It cost me about $15 to ship it (with box, packing, and insurance at a UPS store). They charged me $130 to rebuild it and gave me a 5 year warranty. It cost $8 to ship it back. To in total, it cost me $153....totally turn-key.
×