SOURCE: Pontiac Bonneville(2000) oil pressure sending unit
The oil pressure sending unit is located behind the oil filter, Threaded into an aluminunm housing. It has wiring that plugs into the sending unit. The oil filter has to be removed and you will need a deep well socket and a 6 inch extension. Change the oil and the sending unit together.
SOURCE: 360 motor losing oil pressure after15min of running
Try hooking up a mechanical gauge to make sure you have a problem.
SOURCE: Where is the oil sending unit on a 2002 dodge ram 1500 4.7 L?
it normally is located near the oil filter it looks like a little plug with a wire on it
SOURCE: location of oil sending unit
its on the rear of the block, driver side, about halfway up --- behind and practically entangled with the harness.
A better question: How do you remove the connector?
SOURCE: oil pressure sending unit location
oil pressure sending unit show location on 2000 dodge caravan V-6
72 views
Usually answered in minutes!
×