How do I time a 1994 dodge caravan 3 0L Problem PLEAS IF ANY ONE HAVE THE DIGRAM

Is this what you needed?

Fig. Fig. 14: Sprocket timing for belt installation-3.0L engines

Fig. Fig. 15: Secure the sprocket when removing or installing the nut-3.0L engines
How do I time a - 0900c15280215dd9.jpgimg src="/uploads/images/0900c15280215dd9.jpg" alt="0900c15280215dd9.jpg" class="h_mi" />

Fig. Fig. How do I time a - 0900c15280215dda.jpgioner-3.0L engines

Fig. Fig. 17: Positioning the tensioner-3.0L engines
The timing belt can be inspected by removing the upper (front outer) timing cover.

1. Disconnect the negative battery cable.
2. Remove the accessory drive belts.
3. Remove the timing belt covers.
4. Identify the timing belt running direction to avoid reversal during installation.
5. Loosen timing belt tensioner bolt and remove timing belt.
6. Remove the crankshaft sprocket flange.

1. Rotate the crankshaft sprocket until timing mark on crankshaft sprocket is lined up with the oil pump timing mark at 1 o'clock position.
2. Rotate the (inner) camshaft sprocket until mark on (inner) camshaft sprocket is lined up with the timing mark on alternator bracket.
3. Rotate the (outer) camshaft sprocket (radiator side) until mark on the sprocket is lined up with the timing mark on the timing belt inner cover. Refer to timing belt illustration.
4. Install the timing belt on the crankshaft sprocket while maintaining pressure on the tensioner side.
5. Position the timing belt over the camshaft sprocket (radiator side). Next, position the belt under the water pump pulley, then over the (inner) sprocket and finally over the tensioner.
6. Apply rotating force in the opposite direction to the camshaft sprocket (radiator side) to create tension on the timing belt tension side.
7. Rotate the crankshaft in a clockwise direction and recheck engine timing marks.
8. Install the crankshaft sprocket flange.
9. Loosen the tensioner bolt and allow tensioner spring to tension the belt.
10. Again rotate the crankshaft in a clockwise direction (2) full turns. Recheck the engine timing. Tighten the tensioner bolt to 23 ft. lbs. (31 Nm).
11. Install the timing covers.
12. Install the accessory drive belts.
13. Connect battery negative cable.

Http://www.2carpros.com/diagrams/dodge/caravan/1994