The Throttle
Position Sensor (TPS) for Sorento & Sedona models. Some Sorento
& Sedona vehicles may exhibit diagnostic trouble codes P0121 and/or
P1121. This condition mainly occurs in high ambient or desert areas,
and can be related to the occasional increase in contact resistance due
to excessive wear of the inner elements of the TP sensor. This bulletin
describes the proper service and adjustment procedure for replacing the
TP Sensor. - Service Procedure Replacement Procedure: 1. Turn ignition
OFF. Remove engine cover and disconnect electrical connector from TP
Sensor. 2. Remove two (2) retaining screws from TP Sensor and remove
from throttle body. 3. Install new TP Sensor to throttle body. Install
retaining screws and hand tighten lightly. Adjustment will be required.
Re-install electrical connector to TP Sensor.
Download this file it will help: http://ww2.justanswer.com/uploads/PENTICO/2010-02-21_234050_sorento.pdf
5,616 views
Usually answered in minutes!
×