I have a madza 626 2002 the air conditon was on recently but now the light is off and the knob that controls the heat and the air condtion doesnt go on, is it the fuse and where is it located at. i dont have a manual for the car
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The vehicle has overheated that coolant that leak out that is why the air condtion doesnt get cold. The vehicle is trying to communicate to you you have a coolant leak going on
You need to set the fan control knob to #2 position and pull the knob off. Get a pair of needle nose pliers and extract the bulb. Take to the auto store and get a replacement.
You have a broken wire connection between the temperature control knob and the circuit board behind the center dash console. Vibration causes the failure and once the control knob gets loose the solder connection fails.
For someone that knows how to remove the dash unit and can re-solder a couple of new wires this fix should take no more than 1 hour. Make sure that you apply loctite to the heat control knob spindle nut when you re-assemble it.
The dealer quoted me 750 dollars to fix this issue and I found out that it's a common failure for this year. I fixed mine virtually for free but it took some tools and about an hour of my time.
the fuse box is located at the left suspension c ase at the fron the control is not working -- it could be the wiring please check with the fuse and then wiring you have a fuse case next to the left suspension at the front
The radio screws holding the radio are not tight enough. to eliminate this problem remove the radio and adjust the pressure screw in the rear of the radio so it comes out farther>. if the radio is not far enough in the compartment to push in that button the radio controls will not work
×