97 mustang (V6 3.5 l - Automatic)

I tried the DIY service and repair manuals from a website and it actually helped
me repair transmission problem in my ford explorer. it wont move forward or reverse, engine is good both solenoids for forward and reverse work.
I don't have much technical knowledge but I just followed it step-wise, and works perfect! got it from www.reliable-store.com

Jack up the truck and see if brakes are locked.. or just try pushing it if it rolls its probably a trans problem not a brake problem. could be the park prawl is broken in the Trans.

Sounds like the first gear in the automatic transmission is out.

is it a manual or automatic transmission I need more info

i think they are ,try jacking it up and turning wheel backwards ,the rear brakes

If not done so, inspect for damage to linkage,cables, tubing and wires at transmissoion. You may be lucky there before seeking repairs.

The coolant temp sensor basicly tells the computer whe it's can move into the go mode. WWatch to see if there is a corresponding between the engine temp and the go mode. Good Luck, _Ned_

Check the shift cable at the transmission housing. It may have slipped off the shifter arm.

I have a 1997 ford mustang v6. It starts up for like a split second then dies out. Just replaced the fuel filter.