Check the crankshaft sensor. Many of these failed in the recent years.
If you need further help, reach me via phone at https://www.6ya.com/expert/louis_d357d39108b5f536
SOURCE: Need to find free resources regarding 2003 Kia Rio Cinco Manual
here you go 11 is shift rod end oem# ok2n117423 , 16 shift rail , 18 snap ring , oem # ok30a17486 22 arm
SOURCE: My 2003 Kia Rio Cinco back hatch latch handle is
We had the same problem.
I took out the bolts outside, then crawled into the back area of the car, and took a screw driver, and slid it along the inner hatch catch, and found the safety latch and released the hatch. Then I took the inside off, and disconnected the handle device from the inside. It was rusted, and broken. I went to Kia, and bought a new one and reinstalled, after greasing the new one up. Took me a while, but they wanted 280.00 in labor, so it was well worth it.
Just be patient and go slow. A good metric socket set will be the best thing, with a regular and phillips screw driver.
Good luck
David
SOURCE: location of vehicle speed sensor on 2002 kia rio
IT should be on the driver side pluged into the trans you should be able to see it looking from the front of the car under the hood its held in by one blot.
245 views
Usually answered in minutes!
×