Power steering not working - 2006 Suzuki Grand Vitara

To get power steering set up on a 4010 Mule 2013, you can follow these steps:

1. Purchase a power steering kit designed for the 4010 Mule 2013 from a reputable manufacturer.
2. Gather the necessary tools, including a socket set, torque wrench, pliers, and a wire stripper.
3. Disconnect the battery and remove the stock steering system from the Mule.
4. Install the power steering kit by following the manufacturer's instructions, which will typically involve mounting the power steering unit, attaching the steering column, and connecting the wiring harness.
5. Reconnect the battery and test the power steering system to ensure it is working correctly.
6. Adjust the power steering system as needed to achieve the desired steering feel and response.

It's important to follow the manufacturer's instructions carefully to ensure the power steering system is installed correctly and works properly. If you are not comfortable working on your Mule or have any doubts about your ability to install a power steering kit, it's recommended to consult a professional mechanic.

Steering and Brakes are totally unrelated.

Steering wheel, steering pump, steering rack, wheels.

Brake pedal, brake servo, brake calipers and discs.

Take it to a garage.

how power steering works
https://www.google.com/search?q=how+power+steering+works

How servo assisted brakes work
https://www.google.com/search?q=how+power+assisted+brakes+works

..

1.Steering wheel is hard to turn : ... The power steering box or rack or power steering pump is bad: Repair or replace steering gear or pump as required. The fluid level in the power steering reservoir is low: Fill fluid to proper level. The power steering drive belt is damaged or broken: Replace power steering drive belt.

Car Power Steering Diagnosis and Troubleshooting - AUTOINTHEBOX

blog.autointhebox.com/car-power-steering-diagnosis-and-troubleshooting.html https://www.google.co.uk/webhp?sourceid=chrome-instant&rlz=1C1CHBD_en-GBGB719GB719&ion=1&espv=2&ie=UTF-8#q=Powering+steering+trouble+shooting

What make , model an year vehicle ? GM vehicles had a recall on the electronic power steering >

Check the drive belt to the power steering pump and the level of fluid in the power steering reservoir.

In relation to these problem there is solved help link,i suggest you to go click the link below and troubleshoot the problem:-----

POWER STEERING TROUBLESHOOTING, STEERING SQUEAKS, POWER STEERING FLUID LEAKS, FAULTY POWER STEERING PUMP, POWER STEERING NOT WORKING, POWER STEERING BELT,

http://alltypesofpartsreplacing.blogspot.com/2012/12/power-steering-troubleshooting-steering.html

---------

These will help.

Thanks.

Hi Ben,

Air in the line. Be sure the steering fluid level is up to the fill line.

Turn the wheel to the stops both ways a couple times.

Check the level again.

Repeat until the level remains static,

Best regards
Mike

can you look and see if the belt that turns the power steering pump broke or is slipping or quit pumping or if the rack and pinion is conking out. it is 1 or the other . pump and a rack & pinion they both have to work to get power steering.

have the power steering steering self tested for a defective steering assist sensor on the steering column

Three possible causes that I can think of:
1. The belt for the power steering pump broke.
2. The power steering pump itself failed.
3. Loss of power steering fluid.
Best to find a local shop to deal with this. The power steering system may need servicing if adding power steering fluid doesn't work.