2000 toyota camry code p0401 change egr valve light came back on. Check for possible soulution. I'm having trouble locating the EGR Pressure Sensor (DPFE) at stores. Is there another name for this part for toyotas?

Hi Joe

Yes, it is EGR Valve. Did you clear the code?

https://www.google.com/search?q=1996+Toyota+Corolla+1.6++P0401

What about the IAC?

https://www.google.com/search?q=1996+toyota+corolla+1.6+iac+valve

What are the plugs like?

It is something simple.
..

Hi Joe

Like all solenoid valves, you can clean them with throttle body cleaner and then test the solenoid electronically with a 12 volt supply.

P0401 Exhaust EGR Flow Insufficient

Toyota Nation Forum https://www.toyotanation.com > threads > p0401-exha...
May 1, 2014 - The sensor is how the ECM determines there's insufficient EGR flow. It's on the intake-side of the system and if not enough exhaust-gases flow ...

p0401 code ' Toyota Nation Forum
Aug 14, 2021
P0401 egr ' Toyota Nation Forum
Jul 19, 2012
P0401 Testing EGR insufficient flow - Toyota Nation Forum
Jun 18, 2015
More results from www.toyotanation.com

P0401 : EGR Flow Insufficient on 1996 Toyota Corolla

OBD-Codes.com https://www.obd-codes.com > forums > viewtopic
Jan 20, 2007 - on EGR codes, we recommend replacing the EGR, vacuum modulator and VSV (if equipped) and cleaning out the carbon buildup to the intake from the ...
If that finds nothing wrong, remove the EGR valve and bypass tube and check them for cleanliness and blockages. If they are blocked, follow your maintenance manual's instructions for cleaning them out so you do not damage the valve, then replace them and reset the ECM.

Insufficient EGR Flow - P0401 Code - Toyota

The code P0401 means P0401 Exhaust Gas Recirculation Flow Insufficient Detected.
__________
airbag reset tool also check fault code!

OBD-II Trouble Code P0401 - Insufficient EGR Flow

EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor EGR (DPFE). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR. You may notice drivability problems such as pinging (a.k.a. pre-ignition knock) when the engine is under load or the vehicle is at higher speeds. There may also be other symptoms.

A code P0401 most likely means one or more of the following has happened:
The DPFE (differential pressure feedback EGR) sensor is faulty and needs to be replaced
There is a blockage in the EGR (tube), most likely carbon buildup
The EGR valve is faulty
The EGR valve may not be opening due to a lack of vaccuum

Check it and keep us updated. Hope this helps (remember to rating this free answer).

This error means Exhaust Gas Recirculation Flow Insufficient Detected.

You can deatils on the following site http://www.permoveo.ltd.uk/tabid/122/OBD-Error-Code/P0401/Diagnostics/Hyundai/Default.aspx

but for convenience I have reproduced that information here:
.
Generic OBD Error Code Details for P0401 Exhaust Gas Recirculation Flow Insufficient Detected What does this mean? OBD Code P0401refers to
EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor EGR (DPFE). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR. SymptomsPossible sumptoms of OBD code P0401
You may notice drivability problems such as pinging (a.k.a. pre-ignition knock) when the engine is under load or the vehicle is at higher speeds. There may also be other symptoms. CausesPossible causes of OBD code P0401
A code P0401 most likely means one or more of the following has happened: •The DPFE (differential pressure feedback EGR) sensor is faulty and needs to be replaced•There is a blockage in the EGR (tube), most likely carbon buildup •The EGR valve is faulty •The EGR valve may not be opening due to a lack of vaccuum Possible SolutionsIn fixing this code, it is quite common for people to just replace the EGR valve only to have the OBD code return. The EGR valve is not always the culprit. •Use a vacuum pump and pull the EGR valve open while monitoring engine RPM's & DPFE voltage. There should be a noticable difference in RPM's with the EGR open •Clean out the EGR valve and/or tubing to remove deposits•Check the voltage at the DPFE, compare to specified values (refer to a repair manual for your specific model)•Replace the DPFE sensor (with a good quality / OEM one)•Replace the EGR valve Related CodesP0400 P0402 P0403

P0401 OBD-II Trouble Code
Insufficient EGR Flow

What does that mean?
EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor (DPF). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR.

P0401 OBD-II Trouble Code
Insufficient EGR Flow
What does that mean?
EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor (DPF). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR.

how I change the EGR valve assist switch for toyota camry 2000

There is a vsv (vacuum switching valve) located under the intake manifold that goes bad very often causing this code. Its hard to get to. Follow the hoses from the black plastic round valve(egr modulator) you see next to the EGR valve to find the vsv.

If you have a P0401 code from a CEL, the first thing is to check the EGR vacuum modulator. It is a little well usually next to the EGR. Pop the cap off and dust the little sponge inside. Sometimes this gets stuffed up with carbon particles and causes recirculation problems. You should clean the tubes hooked to it while you are there. Reset the code and see if the light comes back.

Replacing the EGR is not a tidy job. It is an expensive part to replace and you will disconnect the three hoses and dismantle it from engine by two nuts. Save it for the later if the previous trick fails to work.