Hi, the crankshaft sensor sit between the a/c compressor and the crankshaft pulley, sensor bolts to the side of timing chain cover, only 1 bolt holds it in place, only one, disconnect sensor harness, remove 10 or 8 mm bolt, sensor will slide right out.
Yes.......
Yes it is.
You can now rate my solution............
×
SOURCE: Where does the crankshaft position sesor go on a
The crankshaft sensor sit between the a/c compr and the crankshaft pulley, sensor bolts to the side of timing chain cover, only 1 bolt holds it in place, only one, disconnect sensor harness, remove 10 or 8 mm bolt, sensor will slide right out. Hope this was very helpful.
Crankshaft sensor is the one to the right of a/c compr.
P0316 - Engine Misfire Detected on startup (first 1000 revolutions)
Possible Causes:
- Faulty Crankshaft Position (CKP)
- Crankshaft Position (CKP) sensor harness is open or shorted
- Crankshaft Position (CKP) sensor circuit poor electrical connection
- Ignition System
- Fuel Injectors
- Running out of fuel
- Fuel Quality
- Faulty Engine Control Module (ECM)
Read more: http://engine-codes.com/p0316.html#ixzz31EDr0zUN
Are there any additonal codes being thrown for a misfire? Coils and plugs would be a likely culprit knowing this car
•
How to test Crankshaft Position CKP Sensor?
---------------
Crankshaft Position Sensor Operation?
----------------
Replace Camshaft position sensor and Crankshaft Position Sensor?
http://technoanswers.blogspot.in/2012/06/2005-dodge-durango-replace-camshaft.html
----------
GMC Crankshaft Position (CKP) Sensor
Replacing?
http://schematicsdiagram.blogspot.com/2011/12/gmc-crankshaft-position-ckp-sensor.html
------------
These details will help.
Thanks.
2,082 views
Usually answered in minutes!
is that on a linclon ls 03
is that on 03 lincoln ls
is that on lincoln LS03
thanx
is that on the driver side or the other
is that on driver side or other
×