You hook up a code scanner and press the reset code function or you can disconnect and reconnect your battery. If there is something which is at fault after codes are cleared engine light will come back on and you should get codes checked. Most parts stores will check for you for free but their level of mechanical expertise can very drastically so check back here with trouble codes which you can't determine for further help
REMOVE POSITIVE BATTERY CABLE FOR 1 MIN RECONNECT START ND MAKE SURE NO LIGHT IS PRESENT ALSO YOU CAN STOP AT ANY AUTO PARTS STORE AND THEY WILL RESET IT AT NO COST WITH A SCANNER B.HARRIS A.S.E. 25 YRS. EXP.
Generally, disconnecting the battery few minutes you can reset the computer; if the "check engine light" come on again, you need scanned the PCM to know which fault code is stored there. Autozone or other AutoShop with scanner reader could make this job.
With this code number could send additional details to solve this wrong.
Has to be checked on a fault code reader machine to identify problem first then repair item and then reset all by using code reader
931 views
Usually answered in minutes!
×