At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
how about the 91 geo storm gsi 4 speed automatic where do you connect to the computor regarding codes for the transmission it will not go out of second into 3rd or 4th goes from 1st to decond greathow about the 91 geo storm gsi 4 speed automatic where do you connect to the computor regarding codes for the transmission it will not go out of second into 3rd or 4th goes from 1st to decond great
it is a 91 geo storm gsi automativ jetco transaxle 4 speed so is the computor still where u said it is?it is a 91 geo storm gsi automativ jetco transaxle 4 speed so is the computor still where u said it is?
You can't post conmments that contain an email address.
Re: Where do you conectect mto the computer on the 91 geo...
For 1990 Geo Storm 2+2 1.6L MFI SOHC 4cyl the OBD Diagnostic Link Connector is located front seating area, passenger side, under dash, above kick panel, mounted rear of glove compartment.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
how to? is that a question, above lacks one.
Can you , maybe
how to , like all belts (remove , replace and retension)
who sells them autos stores
who makes the best, maybe gatorbelts.
what tools do i needed, we cant guess engine there. or if AC fitted
why not read the book.
which engine is it.
open hood, see that EPA sticker it tells you which there.
interchange
short block
long block
or long + manifolds and all sensor.
what engine.?????????
the 91 cars , typically have 3 fuses that must be good. to get fueling. why do you need to find a non existent relay.? state the symptoms, and stop guessing.
3 fuses that make the ECU operate then the ECU drives the inector, directly.
the full schematic is in the FSM and here alldata dot com. or in most public libraries, in the e-sources , directory, click Autorepair (free too)
If you don't know what you are talking about you shouldn't answer how could it be your starter if the engine is cranking over but won't start da big red truck !!!
the fuel filter is direclty below the brake booster mounted on the left side fender when your facing the car from front but be careful as to not twist and break the metal hoses on the fittings on the filter
The timing marks are located near the top of the crankshaft pulley on the plastic timing belt cover. There is a notch in the pulley to mark TDC (Top Dead Center) Align the notch with the 0 mark on the plastic cover to set your base timing. Ground the proper circuit on the ALDL connecter located under the dashboard somewhere under the steering wheel. Check the manual for the proper circuit to ground. With the engine warm and the circuit grounded. Set the proper timing. Un-ground the circuit and you are done.
how about the 91 geo storm gsi 4 speed automatic where do you connect to the computor regarding codes for the transmission it will not go out of second into 3rd or 4th goes from 1st to decond great
it is a 91 geo storm gsi automativ jetco transaxle 4 speed so is the computor still where u said it is?
×