Where is speed censor located on tranmission - 2000 Dodge Ram 1500 Truck

It is located on the case of the tranmission

A speed censor would be a part which refuses to tell you how fast you are going. A speed sensor tells the computer how fast the final drive is turning, and thus is normally located on the rear section of the transmission and held in place by bolts or screws in place.

Rebuild transmission probably due. How often did you change trans fluid and filter? How many miles on unit?

Wheel speed or trans turbine speed sensor?

It is located on the case of the tranmission.

Drivers side of transmission just about center and back center. Imput speed sensor and output speed sensor

There is two (2) speed sensors, here is were they are located..hope this helps you ??

the speed censor is on the side of the tranny it has a two wire pluggin going to it.speed censor are pretty easy to put in ,they just tread in to the side of the tranny.

HI the speed sensor is located on the front of the transmission. You will need to remove the air cleaner houseing to get access. The sensor will be to the right and under the shift linkage. I hope this helps happy hunting.

Hi, the output speed sensor in located on the left side(drivers side)at the rear of the tranmission. The input speed sensor is located in the front of the transmiison on the left side as well, and yes both speed senors are interchangable.
Take care