Cd player is in off made after I put the wrong code in 3 times

VERY HELPFUL. I did what you told me and now it's working again. Thank you very much that saved me a trip to the dealer.

Here is the answer to the best of my knowledge. This applies to any body that has the need to get the code from the dealership and requires to pull out the radio and look up the serial number. The process is very simple, just follow these steps and you'll be on your way to listening to your radio again. First of all don't think you need to unscrew anything. The wood panel sorounding your stereo snaps out by pulling on it or using a flat screw driver at the corners. Once you have taken the panel out, you can see that the radio is held in by 2 hooks. Push up and pull forward slightly. You don't have to pull out the entire radio because you can see the serial number on the top surface very easyly. Write down the number next to where it reads s/n. Once you have the serial number, call the local dealership and give them your serial number. They will in turn give you a four digit code number that you will enter on your radio. One thing to note is that if you have entered the wrong code number 3 times, your radio would lock up and it would read "OFF". To unlock it, simply park your veichle in a safe place and leave the radio on for about 1 hour (no engine running just click the ignition switch to operate the radio). After one hour, the radio resetes and will aks you again to enter the code. start entering one number at a time using the first 4 buttons. Example, if your code is 4538, you would push button 1 four times to get to the number 4, you would push button 2 five times to get to the number five and so on.. After you have entered the correct code, push the cd button and there you have it. I hope this helps.