1996 Ford Crown Victoria Logo
Posted on Apr 06, 2011

Turn signals do not work nor does emergency blinkers. They sometimes work for a short while then stop working. Vehicle is a 1996 crown victoria.

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 13 Answers
  • Posted on Apr 06, 2011
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Apr 06, 2011
Answers
13
Questions
0
Helped
12083
Points
41

You probably have a short somewhere or you have a bad relay.

Check in your fuse box and see if there is a relay (a big button looking plug with all your small fuses) that is labeled to control the turn signals. More than likely there is a relay for your emergency lights. Go to your local parts store, get the replacements for your vehicle, pull out the old ones and put in the new ones.

If this doesn't solve the problem, then you've probably got a short somewhere and you will need to go to a shop that specializes in auto electrical to get it diagnosed.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My 2004 Crown Victoria turn signal will not cut off as I'm turning the corner usually I do not have a problem with this but it has recently stopped working what could be the problem?

Hi,

Inside the switch mechanisms are plastic pieces that actuate the cancelling of the turn signal. Typically, you have to replace the turn signal switch. Not terribly easy and you need to deactivate the air bags, use steering wheel puller and a lock ring puller.

The wires are sometimes really difficult to reefed, sometimes not.
0helpful
1answer

My signal lights dont work on my 1995 ford crown victoria i need to know what fuse to change

turn signals usually have a flasher relay, you might also look at the switch in teh steering column. if the emergency flashers still work, swap the flashers, to see if that fixes the flashers.
1helpful
2answers

Turning signals not working all the time

Sounds like the blinker relay. Is the emergency flasher switch on the dash above the radio ? If it is the blinkers relay is the same as the emergency relay. If the blinkers stop working pound on the emergency lights switch and if they start working then replace the emergency lights relay switch cause the blinkers is on the same relay as the emergency lights. My 2001 Grand Am does the same and I just hit the emergency lights switch and they start working again.
2helpful
1answer

'96 ford Crown Victoria....No hazard or brake light no turn sigal

Sounds like the multifunction switch. Try working the hazard switch up and down a few times to see if you get some lights to work. If so then replace the switch.
0helpful
1answer

When I turn on the heat/AC on my 2000 crown vic my turning signal fuse blows. What could be the problem?

My heat nor turn signals work worked fine then stopped. I have a 91 lx crown Victoria
2helpful
1answer

Turn signals stop working , everything else is ok, which fuse is for turn signals on ford crown victoria 2002 p71.

IT IS PROBABLY THE MULTI FUNCTION SWITCH ..THAT IS WHAT YOU USE TO TURN THE BLINKERS ON..TRY TURNING ON YOUR EMRGENCY BLINKER BUTTON AND IF THEY WORK THAT WAY IT IS NOT THE FUSE...THE MULTI FUNCTION SWITCHES ARE PRONE TO FAILURE...
0helpful
1answer

Blinkers will not stop making noise

its time to replace your flasher relay
0helpful
2answers

No turn signals or emergency blinkers

Sounds like a multifunction switch, work the emergency flasher button up and down a few times, then attempt to work the turn signals if the signals work then you will need a multifunction switch.
3helpful
3answers

Blinkers stopped working

Your F--150 has 2 flashers, emergency and turn signal. Both are mounted on the fuse block under the dash. The turn signal flasher is mounted on the front of the fuse panel, the emergency flasher is mounted on the rear of the fuse panel. so replace the turn signal flasher should solve the problem. Let me know how it goes.
Not finding what you are looking for?

252 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...