My problem is my passengers side front door wis not making contact band my interior lights stay on... As well as the door ajar symbol on my dash panel.. How do I remove the door panels???
Tks Maxwell
I have the same problem on a 1999 Lincoln Continental door ajar light is on and the interior light is on but doors are close where is the switch at ? if inside the door how do I take the panel off.I have the same problem on a 1999 Lincoln Continental door ajar light is on and the interior light is on but doors are close where is the switch at ? if inside the door how do I take the panel off.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
door sensor is bad. switch is staying closed allowing juice to interior lights. The door switch is there. have autozone or napa look up the location for you...
Make sure that the thumbwheel that makes dash lights brighter/dimmer is not all the way to bright. That will turn on dome light. Check fuse block for dome light relay, pull out the relay and see if light goes out, if so try replacing the relay. Possible welded contacts? If all that doesn't work you will have to try each door switch and see if you have a bad one.
is the door ajar light on sometimes also when driving? I had a similar problem with the light staying on. I determined that it was the passenger front door latch sticking. I opened the door, then took a screwdriver to push the latch shut on the door jamb. (Make the truck think the door is shut even though it is open). Then lubricate that jamb and pull the handle open to open the door. Keep doing this (closing with screwdriver and opening with handle) until the latch works freely. This took care of my light and door ajar problem.
Have lost power to the passenger side door. Without power system doesnt recognize door closed because of no power to door ajar switch which keeps dome light on. Security light stays on because without power to rest of systems supplied by fuse it cannot tell if doors and windows closed to engage security features. Most common is for power wire to break somewhere near where it leaves to main body and enters the door.
Lube your door latches. One of the door ajar switches are sticking . Use wd40 or some othe spray lube . Spray into the latch and open and close doors several time.
×