Engine shut off willnot crank after heating up geting code 34

DTC - 34 MAP Sensor Circuit Error (Signal Low Indicating High Vacuum)

The ECM uses the Manifold Absolute Pressure (MAP) sensor as an indication of engine load. High voltage would indicate low engine vacuum and higher engine load. Low voltage would indicate high engine vacuum and lower engine load. The ECM uses the information from this sensor to help calculate fuel delivery and spark timing.

Fault Code Description:
* 34 - MAP sensor circuit error (signal low indicating high vacuum)

Symptoms:
* Poor engine performance
* Engine running lean (not enough fuel, hard starting, lack of power)

Common Problems:
* GM MAP sensors do not commonly fail
* Due to erratic engine vacuum, other engine performance problems can cause a code 34 to set


Good luck (remember to rate this answer).