At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: How to remove rear seat in 2008 accord ( the seat you...
Most back seats have two hooks on either side of the seat. Pushing in quite hard on the front of the seat and lifting it up is the usual way to release them. Hope this helps.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The rear seat is four (4) pieces.
You will need two tools a 6mm and 8mm wrenches. 1.) Unbuckle the rear seat belts. 2.) Locate the bolt in the center part of the rear seat, between the cushion and the seat-back. Remove the bolt with a 6 mm socket wrench. 3.) Push down firmly on the front edge of the rear seat cushion and pull it toward you to unhook and remove the rear seat cushion. Push the seat belt stalks through the center holes and lift the cushion out of the Accord. 4.) Pull the lever on the side of the rear seat bolster to lower the rear seat-back, which must be in the down position to access its bolts. 5.) Slide the center seat belt toward the passenger side of the vehicle. Move the loop over the edge of the seat-back to prevent it from hindering removal. 6.) Remove the three bolts from the bottom edge of the rear seat-back, using an 8 mm socket wrench. One bolt is in the center; the other two bolts are on either side. 7.) Pull the rear seat-back out of the Accord. The remaining sections of the seat should be the two side bolsters. 8.) Remove the bolts from the bottom of the side bolsters with a 6 mm socket wrench. Push firmly against the first side bolster. Push it upward to slide it out of its mount. Repeat the process on the bolster on the other side to finish removing the Accord's rear seat.
This should take approximately 15-30 minutes depending hoe mechanically inclined a person is.
Locate the t-handles on the left and right side of the rear seat cushion.They should be on the bottom front of the seat.Press down on the seat and pull the handles to release the retainers and pull the seat up and out to remove the seat cushion.Hope this helps.Good luck.
You usualy drop tank to get fule pump but on this car you may be able to get to it if you remove the rear seats. by doin this you expose the top of the fule tanks(right where the fule pump sits)
I believe this procedure applies to your 94 Accord: With your hands, press down on the seat cushion where it meets the seat back. Locate the retaining bolt(s). Some models retain the seat with one bolt in the center; others use two, evenly spaced left and right. Remove the retaining bolt(s). Lift the back (toward the rear of the car) of the seat bottom upwards while rotating it toward the front of the car. Disconnect the hooks at the front edge (during the rolling motion) of the seat and remove the seat bottom. Remove the carpet (in the luggage compartment) from the rear of the seat backs. Remove the seat back mounting bolts from the luggage compartment side. Lift out the seat back. If the rear side bolsters or pads are to be removed, remove the lower mounting bolt, then push upward to free the hooks. Hope this helps you.
As I remember, you need to remove the front seat belt mount, & completely remove the back seats, in order to remove the rear door cards, without breaking them. Have fun;)
It's a lot of work for just cleaning. Fold the rear seat down and remove the two 12mm bolts on the bottom corners of the seat back, pull the seat out. Between the seat bottom and the carpet you will find two tabs you need to pull and then pull the seat bottom up and out of the car. Remove the two 10mm bolts securing the seat bolsters to the area the seat bottom was covering. Pull the seat bolsters up and out of the car. Pop the "C" pillar trim off of the car (above the parcel shelf and beside the rear glass) (side airbag vehicles have a slightly different procedure.) Pull up on the parcel shelf carefully and evenly. Remove clean and put everything back together.
×