Creaking squeking noise front end when hitting bumps or turning wheel

that could definitely be your tire rod, and suspension would do that too check your tire rods because that is what happened to my truck

check the u joints in the drive shaft or the rear end needs greased,or it could be going out.have you changed both the inner bearings as well on the front end?

u have a rock or something wedged between ur frame and cab

creaking usually comes from struts or from bushings on the A-arms. Get struts replaced recently? Could be the isolators (rubber between spring purch and springs) deteriorated. These are usually the prob if it creaks when you turn the wheel. If it creaks when your push on the car up and down - its a bushing. These dry up and crack and/or creak when old.

Jack up the wheel and see if it has play up and down and left and right. Have someone watch inboard as you move it. A bad cluck will usually show itself.

You might want to check the ball joint. None of them have grease zerks and can dry out. They will cause a noise when turning or hitting a bump, if really bad. Hope this helps.

Still sounding like a bushing, but it also could be related to a strut. I have tried this in the past....jack the car up and ONLY on one side first, use WD-40 and spray each of the bushings well. Leave the upper strut area alone...do your normal driving. If you still have the squek/crunch, etc, spray the upper strut area. A rare ocassion it can be the upper strut mount.

let me know how it goes!

That noise sounds to me like a Ball Joint problem. I would check to see if you have fittings to grease the front suspention.

Good luck, Allen

If it is new take it back to the dealler for warranty repair. No new vehicle should have any noises . seriously, take it back for repair.

Sounds like it is your CV axles.  Turn the wheel one direction, right or left, and check just behind the wheels to see if your CV boot is cracked or ripped (the boot is a black, rubber accordion looking thing).  If it is cracked or ripped, I would say that is definitely the problem.