Re: 2001 gmc yukon.hot air coming out the rear vents only...
Try cheking the heater hoses located on the fire wall there are two of them if they are hard then they need to be replaced if they are soft then they are good. also chek the heater core
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
? 2:25
https://www.youtube.com/watch?v=Eqf-H3COtSo
Nov 4, 2013 - Uploaded by 2CarPros
My problem in my 2004 chevy tahoe is that it will not blow out of the dash or ... onto the vent door gears ...
forums.edmunds.com > Chevrolet > Chevrolet Suburban
Jul 20, 2010 - 30 posts - 16 authors
I just don't get why that doesn't work right in the first place. ... I have 99 Yukon that has a problem with the front air. .... $55,000 for my GMC, I guess expecting cold air when we push A/C and getting 90 degree blast ... 2001 Yukon XL 1500 Front heat & air fine, rear ac blows hot as if heater is on in all settings.
More results from forums.edmunds.com
www.tahoeforum.com > ... > Technical Discussions Dec 5, 2008 - 10 posts - 7 authors
2001 Tahoe, the front heater blows a little hot air when the car warms up and then blows cold air. The rear heat seems to work fine. I changed ...
Jul 14, 2008 - 10 posts - 5 authors
On my wifes 03' Yukon the rear air conditioning blows hot air no .... Pull the panel off and look at the hot/cold actuator shown in the picture.
I have a 2000 GMC Savana Van SLT with front and rear AC/Heat. My front would blow hot while the rear blew cold with AC on. It turned out to be low on Freon. It's hard to know if you have the right amount of freon installed because pressures vary depending on the ambient temperatures. So the best way is to remove all the freon then reinstall the recommended amount as listed on the evaporator housing near the firewall. This worked fine for me... works like new after installing the correct amount of freon.
To check the rear expansion valve, see if the a/c lines are different temperatures. One line to the rear evaporator should be hot and the other cold if it is working.
Try to recailbrate the blend door actuator. Remove the HVAC module fuse. Wait at least 15 seconds. Replace it, turn the key on and wait 40 seconds
I believe that this system has a dual condensor setup, my have an issue with the rear condensor, or a leak in the rear lines. Have a pressure test done on the rear setup to see if any freion is still in system.
If you still get cold air out of the rear vents but the front only blows hot air you may have a bad temp door actuator in the dash, it may be stuck on hot and not able to move to cold air. However if you are low on freon with a truck that has front and rear ac then there will be a temp diff between the two. If it is hot air out the front like the heat is on then you have that actuator problem but if it is cool air about the same as the outside air temp then you may be low on freon.
×