1999 v6 chevy venture replacement of spark plugs and wires. confused on wiring order.i need a diagram of wiring order to avoid crossing.

Question edited for clarity.
Question moved to model category.

First diagram in this link as shown on JustAnswer, but you don't even need to go there, just click on the diagram.

https://www.google.com/search?q=2002+dodge+dakota+sport+3.9+v6+firing+order

..

Here is the firing order and spark plug wire routing diagram for a 2006 Chevy Impala LT 3.9 V6:
Firing order: 1-2-3-4-5-6
Spark plug wire routing (starting from the driver's side):

• Cylinder 1: connect to the coil tower closest to the driver's side headlight
• Cylinder 3: connect to the coil tower next to cylinder 1
• Cylinder 5: connect to the coil tower next to cylinder 3
• Cylinder 2: connect to the coil tower closest to the passenger side headlight
• Cylinder 4: connect to the coil tower next to cylinder 2
• Cylinder 6: connect to the coil tower next to cylinder 4

Note: Make sure to route the wires properly to avoid cross-firing.

For spark plug problem, click the help links provided below: ---
Car has no spark?

http://schematicsdiagram.blogspot.com/2011/06/car-has-no-spark.html

------------
How to Replace Spark Plugs?

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-spark-plugs.html

-------------
Car cranks, has spark but will not start?

http://howtobyme.blogspot.com/2011/12/car-crankshas-spark-but-will-not-start.html

------------------------
The spark plug firing order for car?

http://schematicsdiagram.blogspot.com/2011/06/spark-plug-firing-order-for-car.html

----------
How to gap spark plug ? http://technoanswers.blogspot.in/2012/02/how-to-gap-spark-plug-on-chevy-impala.html

-----------
Spark plug Replacing for?

http://technoanswers.blogspot.in/2012/02/spark-plug-replacing-for-chevy-impala.html

-----------
How to identify number one spark plug on the distributor cap?

http://schematicsdiagram.blogspot.com/2011/12/how-to-identify-number-one-spark-plug.html

---------
How does the spark plug wire go on the distributor cap?

http://schematicsdiagram.blogspot.com/2011/12/how-does-spark-plug-wires-go-on.html

---------
Spark plug Firing Order Diagram?

http://schematicsdiagram.blogspot.com/2011/12/2006-suzuki-forenza-spark-plug-firing.html

-----------

This will help.

Thanks.

See Figures 1, 2, 3 and 4
To avoid confusion, remove and tag the spark plug wires one at a time, for replacement.
If a distributor is not keyed for installation with only one orientation, it could have been removed previously and rewired. The resultant wiring would hold the correct firing order, but could change the relative placement of the plug towers in relation to the engine. For this reason it is imperative that you label all wires before disconnecting any of them. Also, before removal, compare the current wiring with the accompanying illustrations. If the current wiring does not match, make notes, to reflect how your engine is wired.

Fig. Fig. 1: 2.5L Engine - Engine firing order: 1-3-4-2- Distributor Rotation: Clockwise

Fig. Fig. 2: 2.8L Engine - Engine firing order: 1-2-3-4-5- Distributor Rotation: Clockwise

Fig. Fig. 3: 3.1L Engine - Engine firing order: 1-2-3-4-5-6- Distributor Rotation: Clockwise

Fig. Fig. 4: 5.0L and 5.7L (VIN 8) Engines - Engine firing order: 1-8-4-3-6-5-7-2- Distributor Rotation: Clockwise
Back to Top

Firing Orders
NOTE: To avoid confusion, remove and tag the spark plug wires one at a
time, for replacement.

If a distributor is not keyed for installation with only one orientation, it
could have been removed and installed improperly and then rewired. The new
wiring arrangement would maintain the correct firing order, but could change the
relative placement of the plug towers in relation to the engine. For this reason
it is imperative that you label all wires before disconnecting any of them.
Also, before removal, compare the current wiring with the accompanying
illustrations. If the current wiring does not match, make notes of the current
plug wire locations and orientation of the distributor cap.

5.7L Engine
1-8-4-3-6-5-7-2

7.4L Engine
1-8-4-3-6-5-7-2

so would i have to connect each of the wires from the distributor to thr correct wire for the spark plugs??

For the 4.0L V6:
Firing Order:
1-4-2-5-3-6
Cylinders:
........(back)........
|...3...|.......|...6...|
|...2...|.......|...5...|
|...1...|.......|...4...|
.........(front)
Ignition Coil Connections:
..(back)
1...2...3
5...6...4

FIRING ORDERS NOTE: To avoid confusion, remove and tag the spark plug wires one at a time, for replacement. If a distributor is not keyed for installation with only one orientation, it could have been removed previously and rewired. The resultant wiring would hold the correct firing order, but could change the relative placement of the plug towers in relation to the engine. For this reason it is imperative that you label all wires before disconnecting any of them. Also, before removal, compare the current wiring with the accompanying illustrations. If the current wiring does not match, make notes in your book to reflect how your engine is wired. Fig. 1: 300 cid (4.9L) inline six-cylinder engines Firing order: 1-5-3-6-2-4 Distributor rotation: Clockwise
Fig. 2: 232 cid (3.8L) V6 engine Firing order: 1-4-2-5-3-6 Distributor rotation: Counterclockwise
Fig. 3: 255 cid (4.2L), 302 cid (5.0L), 360 cid (5.9L), 390 cid (6.5L), 460 cid (7.5L) V8 engines Firing order: 1-5-4-2-6-3-7-8 Distributor rotation: Counterclockwise
Fig. 4: 351 cid W & M (5.8L), 400 (6.6L) engines Firing order: 1-3-7-2-6-5-4-8 Distributor rotation: Counterclockwise
Fig. 5: 6.9L diesel engines Firing order: 1-2-7-3-4-5-6-8

Not exactly sure what you need?
Standard Rules:
Use a Spark Plug Socket to remove and install Spark Plugs.
Replace (remove) one Wire at a time from one Spark Plug.
Replace One Spark Plug at a time. Use Anti-Seize Grease applied moderately to the threads on the new Spark Plug.
Using a Socket (with a extension) START all installations using your hands. This prevents cross-threading and stripping of the threads inside the Heads.
Standard Torque 15-20 ft-lbs.
Replace the One Wire connection to that One Spark Plug.
Replace that One Wire connection to the Ignition Coil.
Go onto the next Spark Plug using the above Rules.
Repeat.

For the 3.4L V6:
Firing Order:
1-2-3-4-5-6
Cylinders:
......(back)
1.......3.......5
2.......4.......6
......(front)
Ignition Coil Connections:
............(back)
.|.5..2.|..|.3..6.|..|.4..1.|
............(front)

3.9L V6 Engine. Engine Firing Order: 1-6-5-4-3-2. Distributor Rotation: Clockwise.............did i guess the right motor? let me know/rate me