Timing marks for 2l s40 2001 model - 2001 Volvo S40

Watch this GM 2 2L Ecotec timing chain replacement 03 Cavalier part 1 Intro and valve...

The link has detailed instructions with many illustrations. How to replace timing chain on Vauxhall Opel Astra 2 0 DTI

Sounds like you bent the valves due to incorrect timing mark alignment.

What marks and what is the problem?

Tension the timing belt
Note! This adjustment is to be
made with a cold engine.
Suitable temperature is
approximately 20°C/67°F. At
higher temperatures (with the
engine at operating temperature
or a high outside temperature for
example) the indicator is further
to the right.
The illustration shows the position of
the indicator at different engine
temperatures.


Carefully turn the
crankshaft clockwise
until the
timing
belt is
tensioned. The belt
must be tensioned
between the intake
camshaft pulley, the
idler pulley and the
crankshaft


Hold the belt tensioner
center screw secure.
Turn the belt tensioner
eccentric counter-
clockwise until the
tensioner indicator
passes the marked
position.
Then turn the
eccentric back so that
the indicator reaches
the marked position in
the center of the
window


Hold the eccentric
securely. Tighten the
center screw. Tighten
to
20 Nm
.Good luck

hi.you have to get your marks lined up with the bottom crank pulley stil on because your bottom mark is on the pulley and on youre timing belt dust cove.hope this helps regards Conraad

Get a Chilton's or Haynes manual for your make year and model. Timing chain/belt set up is a standard subject that always includes photos of set up marks either on the block or head(s). Should be able to find one online, ebay or amazon.

There is no mark. Toyota makes use of 2 different colored links on the timing chain. Get the no 1 cylinder on TDC. Align one of the 2 different colored links on the chain with the mark on the crankshaft cog. Aligh the other different colored link with the mark on the camshaft.

they are on the timming cover, you will see them.

u can *** it manuaally by check ing timming marks or u can do it with a timing light