Question about Nissan Altima

2 Answers

BRAKE LIGHT ON , BKAKES SOFT FADE. i THOUGHT REPLACING PADS AND ROTERS, BLEED ENTIRE SYSTEM. PROBLEM STILL EXIST. I'AM THINKING BOOSTER WHAT DO YOU THINK.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,803 Answers

Brake pads, rotors, and boosters do not cause brakes to fade. They also do not cause the light to come on. Hydraulic leaks cause brakes to fade and also the light to come on. Check all of your brake lines and fittings for leaks. Check also the calipers and/or wheel cyliders for leakage. If you cannot find any external leaks and you are not losing any brake fluid, then the problem is caused by an internal leak in the master cylinder or (if you vehice is equipped with antilock brakes) the antilock control module

Posted on Mar 07, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 878 Answers

It can also be the master cilender

Posted on Mar 07, 2011

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2010 town and country brake pedal dropping after changing all brake pads


Could be the ABS system/pump needs bled. Takes a scanner to do this.

Oct 16, 2016 | Cars & Trucks

1 Answer

Replaced everything in brake system including brake booster,calipers, pads, rotars still won't come to a complete stop It "coasts". To a stop no matter how hard I press on the brake.


Does it feel spongy when you press on pedal ? Sounds a lot like air in the hydraulic lines. Bleed the entire system again and check for leaks in all the lines. Maybe the bleed screws are loose.

Oct 05, 2016 | 1998 Mercury Mountaineer

2 Answers

No peddel


keep bleeding the system,if u didnt bench bleed the master cylinder,you will need to do that.Its a must

Nov 23, 2012 | 1988 GMC S-15

2 Answers

No brakes I think the booster was going out because my peddle got soft but would still stop me then i changed my brake pads shortly after the brakes completly went out and can now only stop with the...


The problem is not the booster, the job of the booster is to make braking easier. If the booster went out the brakes would be hard to press.
Your soft pedal is likely due to air in the brake lines. Bleed the brakes and go from there.

Dec 13, 2010 | 1992 Buick Park Avenue

2 Answers

Bleeding air out of brake line after changing brake pads,we got no air bubbles but still have a spongy or soft brake peddle


Bleed the longest line first, then progressively shorter lines. Make sure you are using the correct technique in bleeding--be sure the master cylinder is always full, then pump the pedal several times in quick succession and hold pressure while your assistant opens the bleeder valve slowly and lets it drain until your foot is to the floor. Hold your foot until the bleeder is again closed, then repeat the process. Don't reuse the expelled fluid. Hope this helps!

Sep 19, 2010 | 2004 Dodge Ram 3500 Truck

1 Answer

2006 toyota landcruiser brake goes limp, pedal goes soft


Replace your master cylinder. It is leaking out of the back of the master cylinder and into the booster. If you unbolt the master and carefully look into the booster, chances are you will see brake fluid. Replace it, bleed the entire system, and enjoy your truck again.

May 31, 2010 | 2006 Toyota Land Cruiser

3 Answers

!988 k1500 4x4 5.7l brakes


Bleed right rear,left rear, right front, left front in that order to be sure of good bleed but the brake booster makes it easy to push pedal. Make sure of no leaks from master cylinder. Otherwise brake hoses being soft will also hurt baking quickly.

Apr 15, 2009 | 1988 Chevrolet K1500

1 Answer

04 free star soft pedal has new master cylinder pads and rotors


the master cyl must be filled and bled before install.after installing new bled master cyl,bleed all calipers.once you are sure there is no air left in system then you will need a scan tool to perform a abs service bleed.if you do perform the abs service bleed with a scan tool the brake pedal will be soft and start to fade.

Nov 12, 2008 | 2004 Ford Freestar

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

229 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...