-
Master
1,168 Answers
- Posted on Mar 05, 2011
Re: Head bolt torque nissan altima 1995 2.4l
- Tighten head bolts using the following procedure:
- Tighten all bolts to 22 ftlbs.
- Tighten all bolts 59 ftlbs .
- Loosen all the bolts completely.
- Tighten all bolts 18 to 25 ftlbs .
- Turn all bolts 86 to 91 degrees.If an angle wrench is not available, mark all cylinder head bolts on the side facing the engine front. Then, turn each cylinder head bolt 86 to 91 degrees.
There you are as asked for.
Thank you for using FixYA
KL
×