Trunk release button on dash or remoter doesn't work. I hear a clicking noise under the dash but nothing opens. I tried switching out the relay (F0AB-14B192-AA) but this didn't work either. Fuses are OK also. There is no noise or clicking in the back where the latch is. Any ideas?

see if you can pull the back seat down or remove and there should be a safety trunk release inside trunk which may even glow in the dark.

There are 3 phases to fixing your car's trunk lid release problem.

Phase 1: First check the fuse - once you know that's OK, then proceed to phase 2 (below).
The fuse for the trunk lock is
the bcm (pwr) 15A fuse in the instrument panel fuse box (behind panel at drivers right foot)

Check that fuse, as it is the power supply for the button on the dash that sends power to the actuator in the trunk.

Phase 2: Get the trunk open (without taking it to the dealership).
If you have remote keyless entry to the trunk, you could try that - but with the actuator
dead/dying, it shouldn't work.

Here are a couple of ideas to try to enter trunk while (a) actuator isn't working, and (b) all
valet lockout features (designed to deny valets access to the trunk) are in the "Lock" position:

There is the lock cylinder, which you stated is not functioning - put the key in, and it doesn't
turn. Just to be sure, consider: lubricate key with Graphite lock-type lubricant, and retry.

The trunk has 2 valet safetys...the locking rear seats which require access to the trunk to unlock, and then there is a valet switch in the trunk that locks the button on the dash from working to keep valet parking attendants out of the trunk. That may be in the lock position.

You can try accessing the center area of the fold down rear seat and see if you can unhinge the rear seat from there. Maybe reach in with your hand, or an extension-type tool.

there may be a way to fold the hinge away from the seat back so it can be removed from the hinge and give you access to the safety latch in the trunk and open it that way (white handle in trunk).
The white-handled safety latch release is desiged to prevent accidentally trapping children, and
if you can pull it with your extending-type or grasping-type tool, the trunk will open whether or
not the actuator motor is working.

Phase 3: Replace the Problem part.

Your failed part may be either (1) Trunk Release Relay, or (2) Trunk Lock Release Switch

My Satrun ION manual doesn't cover either of these parts, and the online parts houses, e.g.
http://www.rockauto.com/catalog/x,carcode,1431624,pgname,Electrical-Switch%2B%2526%252338%253B%2BRelay,a,search.yahoo.com%2BSearch%2Bfor%2B2004%2BSATURN
fail to provide instructions. One of those times a mechanic has to t=rely on his/her native
handiness and/or experience.
To identify which of these parts is bad, locae the Trunk Release Relay (call your dealer parts
dept. for helpful tips on finding it), then operate the dashboard trunk release button with your
ear close tothe relay - if it makes a noise, the problem is the Trunk Lock Release Switch in
the trunk lid, otherwise its the relay.

If the actuator mechanism is functioning (you hear the click) the next step is to see if the cable is connected to the latch. Open your trunk and press the button - watch what happens. You may have to manually 'lock' the trunk with the trunk lid open to observe the action. You can always unlock this latch with your key if necessary.

Let me know what happens ... good luck

Thanks for using FixYa.cop

Open the trunk and check the wires near the right hinge. You'll probably have some cut wires that will need to get re-connected that go to your lights and trunk release.

sounds like a fryed switch in the trunk
it is only a pop switch in the trunk and they do break

i have a 2005 chevy malibu and i close the trunk with the keys inside and the little button on the door is stock but the car is open is and other way to open the trunk from inside of the car?

Any autoelectrical shop would be able to sort it. Make sure you check all of your fuses in the fuse panel. It may be that a relay is switching but the main source power isn't there.

there is a manual switch that is located near the trunk latch for a safty lockout it might have been switched by accident look to make sure.hope this helps.

I purchased a Chiltons through www.eautorepair.net and looked up the Relay for the trunk release button on the dash. I found the location under the fuse panel under the drivers side and found the relay was not pluged in. I conected the relay and to my dismay the button worked.