Bluetooth wont pair automatically. Once phone has been paired and phone has been tagged, if you turn off the car an walk away for 10 min or so, then start the vehicle, the phone wont automatically pair with the system, you have to start all over with entering a pin. This has happened with 4 different phones, so it has to be the bluetooth in the system

Turn iPhone Bluetooth On:First you want to make sure that Bluetooth is functioning on your iPhone. Click on the Settings icon from the iPhone desktop. From the settings screen click General to show the iPhone General Settings as displayed in the below image. Notice you can see if Bluetooth is on or off from this screen. General Settings screen you can click on Bluetooth to configure the Bluetooth settings. On the Bluetooth screen shown below click to the left of Off to turn Bluetooth On.

1. Begin Uconnect Setup:Now that Bluetooth is operational on the iPhone you can start the Uconnect process. Click the Uconnect button on the rear view mirror to begin. The voice from the Uconnect system will ask you to verbally select one of the options from the menu. Once Uconnect asks for your input say "Setup" to begin the process of syncing the iPhone.
2. Start Phone Pairing:Once you say setup in the above step the Uconnect system will list numerous options available from the setup menu. One of these options is "Phone Pairing" so when the Uconnect system asks for the choices from the setup menu say "Phone Pairing".
3. Pair a Phone:In the Phone Pairing menu you can modify current entries or begin pairing a new phone. After Uconnect lists all of the choices you should say "Pair a Phone" to begin the process of pairing the iPhone.
4. Uconnect Pin Code:The first step in pairing a phone is setting the Bluetooth Pin Code that authorizes that phone to pair with the Uconnect system. When asked for the Pin Code say any four digit combination such as "1 - 2 - 3 - 4". Uconnect will repeat back the Pin Code so you can verify it has recorded properly.
5. Connect iPhone To Uconnect:After you have set the Pin Code for the Uconnect system you need to view the iPhone's Bluetooth Settings screen which you can get to following the steps in Step 1 above. Before the Uconnect system shows up in Bluetooth the Bluetooth Settings screen will look similar to the below where you may have other Bluetooth devices showing or not.After a couple seconds the Uconnect system will display as "Hands Free" as shown in the below image. Notice it states that it is not yet paired,,,,,
6. Click on the Hands Free device showing in the Bluetooth devices list above. This will open a new screen as shown in the below image that prompts you for the Pin Code you specified in Step 5.
   
   Enter the Pin Code and then click the Connect button in the top right corner of the above window. This will pair the iPhone with Uconnect and take you back to the Bluetooth devices screen where the Uconnect Hands Free device will now show Connected as shown in the below image.
   
   After the device is connected you will be prompted by the Uconnect voice again so proceed to the below steps.
7. Phone Name & Priority: After connecting the iPhone you will then name the phone and set a priority between one and seven. Name the phone anything you would like and if this is your primary phone set the priority to one so this phone always connects at a higher priority than any other phone.
8. Verify & Test:Now have a friend dial your cell phone while you are in your car to see if the music volume lowers and the Uconnect voice tells you there is an incoming call from a certain number. To make calls you can press the Uconnect button and follow the voice prompts.
The Uconnect system is a great way to safely use your cell phone in the car.

About 4,890,000 results (0.54 seconds) Search Results

How to Fix Bluetooth Pairing Problems - Techlicious

www.techlicious.com/how-to/how-to-fix-bluetooth-pairing-problems/
Dec 29, 2015 - Determine which pairing process your device employs. ... Let's say you want to pair your phone with your car's infotainment system so you ..... If your tabletdoesn't come with built-in Bluetooth (and it looks like most, if not all, ...

How to Fix Bluetooth Pairing Problems - Techlicious

www.techlicious.com/how-to/how-to-fix-bluetooth-pairing...-/CP2/
Dec 29, 2015 - Let's say you want to pair your phone with your car's infotainment system so you can .... i factory reset my tablet and now it wont find my bluetoothspeaker to pair! .... It doesn't look like you can revert to the previous firmware ...

Bluetooth FAQ for Windows Phone ' Windows Phone How ...

www.windowsphone.com/en-us/how-to/.../bluetooth-faq

Windows PhoneRead the Bluetooth FAQ for Windows Phone and get answers to common ... You can pair your phone with a variety of devices that use Bluetooth, such as the hands-free system in your car, headsets, speakers, ... Where can I find it? .... ?My phone doesn't reconnect to the Bluetooth hands-free system when I get in my car.

iPhone 6 not connecting to car Bluetooth ' Apple Support Commu

First: The Forester's radio/Bluetooth is almost brain dead. We should ALL demand Subaru to provide firmware (software) update to correct to numerous problems with this system.

To somewhat correct your problem:

1. Reserve a big amount of time and patient. It will be painful!
2. Navigate the menus to reset all the radio's Bluetooth settings. Make sure that no phone or device is paired with the radio.
3. Reconnect (pair) your phone to the radio by pressing the TALK button on the steering wheel and follow the voice prompts. Do not pair your phone to the radio by pressing buttons on the radio.

NOTE: ONLY ONE PHONE can be connected to the Subaru's radio system and used automatically when starting the car. Kind-of. If you have another phone or user, then... good luck!

ask toy? how to magic works? does the operator guide answer that.
that be like first.
or google for days?

Turn your phone off then remove the battery from your phone for a minute or 2. Reinstall the battery in the phone turn the Bluetooth on in your phone and make it visible for 3 min. Then try to pair the phone to the car. After you are paired to the car and your car wont find your phone a week or 2 later just remove phone battery for a minute or 2 reinstall battery and you should be ok again. I had a Lincoln that would do that.

Turn on bluetooth on phone.
- settings-bluetooth > on
Turn on bluetooth in car stereo
- Turn on radio, press Menu.- Scroll with knob to Phone. - Press knob to Select.- Turn knob to select Pair.
Back to Phone
- Hit the Scan button to search for BMW bluetooth- Find BMW Bluetooth name on phone and select Pair. - If should ask for a passcode, enter identical pass codes on stereo and phone.

Hi. There is an option to forget bt devices. Forget all of them. Pair your phone again automatically

jaguar parts dept can supply this very easy, contact the parts dept, they have manuals for what each car needs

I'm afraid I can't solve your problem, but you're already one step further than I am: I have a 2004 E60 (525d touring) and it won't pair at all, the N97 doesn't even SEE the car's bluetooth. And my previous Nokia E61i paired, but never transferred the contactlist.

i am a vw tech and have found that some phones just wont pair up i have an envy and it pairs up fine with all the ones that wont pair up with customers phones