I have a 1993 Ford Escort Wagon tht has had it's front bumper and turn signal light housings destroyed. I was wondering how hard it will be to replace them myself and besides the obvious item what else would I need to get it done? Thanks.

Check this procedure for Signal and Marker Lights...


REMOVAL & INSTALLATION
Front Turn Signal and Parking Lights
1991-96 models
(see Figures 1, 2, 3 and 4)

1. Remove the lens upper retaining screw and the fender side retaining screw.
2. Slide the lens assembly forward until access to the rear is possible.
3. If necessary, unplug the bulb electrical connection.
4. Turn the bulb socket assembly counterclockwise and remove it from the lens.
5. Depress and twist the bulb approximately 1 / 8 turn counterclockwise, then remove it from the socket.
   

Fig. 1: Remove the lens upper retaining screw and the fender side retaining screw

Fig. 2: If necessary, unplug theI have a 1993 Ford Escort Wagon tht has had it's - zjlimited_724.jpgl connection

FiI have a 1993 Ford Escort Wagon tht has had it's - zjlimited_725.jpglb socket assembly counterclockwise and remove it from the lens

Fig. 4: Remove the bulb from the socket

To install:

1. Align the bulb's locating pins, then install the bulb in the socket.
2. Attach the socket to the lens and turn it clockwise to engage it.
3. If removed, attach the bulb electrical connection.
4. Place the lens into position, then tighten the fender side and upper retaining screws.