Remove valve cover remove center bolt on rocker arm, it could be a 10mm put new rockerarm in tighten to specification. it could be 15 - 20 ft.lbs. of torque. e-mail me engine size and will email you torque spec tomorrow
SOURCE: rocker arm adjustment
Climers Moter manual has the drirections you need. You just turn the moter, untill both valves are closed. Turn the push rod as you tighten the rocker nut. When the puss rod quits turning, Give the nut on thr rocker on another half turn and your done. Only 15 more to do.
SOURCE: the placement order for the rocker arms on a 1999
call local salvage yard they will likely have a set but it is more likely you eithor need lower ball joints or new bushings soo ask the dealer what normaly is
the problem
5.
Using special tools, Camshaft Oil Seal Installer (09221-21000), press fit the camshaft oil seal. Be sure to apply engine oil to the external surface of the oil seal.
Insert the oil seal along the camshaft front end and install by driving the installer with a hammer until the oil seal is pulley seated.
6.
Install the camshaft sprocket and tighten the bolts to the specified torque.
291 views
Usually answered in minutes!
×