At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: What does p0340 sensor located on 2005 2.4 altima
This is your camshaft position sensor.located on cylinder head near where upper radiator hose attaches to engine......three wire connect and one ten mm bolt secures it.easy to replace.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
DTC P0340 Camshaft Position (CMP) Sensor Circuit . has single sensor . This is circuit problem , testing the electrical circuit's for the sensor before replacing the sensor should be done . Do you know how to test sensor circuit's ?
P0340 is camshaft position sensor #1
before spend any $ inspect the timing belt.
lose timing belt or jump timing will treagar the cod
sensor #1 is right(passenger side)on back of the engine
valve cover.after market sensor wont work long.
buy from dealer once and save headeche.
its not a p0340 sensor, that's the trouble code. its a camshaft sensor your looking for. this code doesn't mean the sensor is bad. it could be a bad connection or a broken wire. but if your looking for it it is on the end of the head above the transmission
In the kit there are two sensor that look identical. The one for the crankshaft has a white paint mark on it near the bolt hole. Make sure that it is in the right location.
There are two cam shaft sensors and one crank sensor Nissian did sell a kit at one time with all the sensors in it one cam sensor is in the left cylinder head a one is in the right cylinder head
Hi..
the Code P0340, Camshaft Position sensor problem or Loss signal.
The Code P0341, Camshaft Position sensor Intermitent Signal.
The First step you should do is : Locate the Camsahaft sensor,
Is located On Right Front of the Engine..
It use a 3 wires Connector.
1-- Pink/Yellow
2-- Brown/Orange
3-- Dark blue/Gray.
After you found it. Inspect the Connector. If is The connector in good condition.
Replace the Camshaft Position sensor...
Ok... I hope this help on your problem..
Thank you for use Fixya...
×