-
Expert
157 Answers
- Posted on Feb 12, 2011
Re: Haw to gat out seat back
Rear Seat Backrest-SuperCab
Removal
- Fold down both rear seat cushions.
- Remove the rear seat back.
- Push the wire hooks rearward to disengage the seat backrest from the back panel of the cab.
- Lift the rear seat back upward and remove.
Installation
- Align the upper hooks with the upper brackets on the back panel of the cab.
-
NOTE: Make sure the safety belt webbing is not twisted.
Route the rear center safety belt through the retainer ******** the rear seat back.
- Place the lower hooks behind the lower brackets on the back panel of the cab.
- Lower the seat back until the lower hooks engage the lower brackets.
- Verify all three upper hooks have engaged the upper brackets
×