- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There are three temperature sensors on a 95 Previa engine. They are located on the left front side of the engine. The lower one is somwhat accessable from under the vehicle but access to the other two will require removal of the passenger seat and the access cover under the seat.
hi soundslike the cooling temperature switch is bad its located by the thurmostat houseing its a 2 pin sending unit that tells the pcm how hot your engine is any parts store will have it hope this helped don
The fuse panel is located on TOP of the center of the dash, just above the AC controls. The D shaped cover lifts off. Under the front lip of the large D shaped cover, right in the center is a button, push the button while lifting up and pulling rearward. All of your fuses and relays are located underneath, as well as your OBD connector.
First you go get a bowl to drain the oil from within the engine and remove a knot underneatthe engine to enable the oil drain out. Remove and replace the oil filter, tighten it properly, then fill in the new oil into the oil compartment of the engine.
The connector would be located under the steering wheel in the mess of wireing under there, it should be cleary labeled and the only main harness not plugged in.
×