What all do i need to change when doing a tune up for a chevy 2005 equniox

ALL TUNES-2008 CHEVY UPLANDER NO START
https://www.youtube.com/watch?v=TnIyKf0JiNU
2007 Chevy Uplander No Start
https://www.youtube.com/watch?v=PN-zlKn5KRo
Starting disabled FIXED!!! Chevy Uplander.
I have a 2005 Chevy Uplander that won't start. The problem...
https://www.justanswer.com/chevy/6jkas-2005-chevy-uplander-won-t-start-problem.html
2005 chevy uplander hard to start
http://www.topix.com/forum/autos/chevrolet-uplander/TALVQR3Q8MKI7M33D/2005-chevy-uplander-hard-to-start

Go to online store reliable they have repair manuals I am sure you will get the solution.
Here's the link
chevy

spark plugs and air filter

I have 06 chevy equniox and i need to know how many 18oz bottle freon will go in my car when it is completely out of freon

did the roar start befor or after you change the tires ?

With the radio off, hold in the tune button in, until it says " setting" on the radio display. Then push the seek button until you find the odometer setting, and then push the tune button in again, and this sould change it back.

its on the passenger side toward the fire wall

No T/C stands for traction control all it does is keep your back tires from spinning on wet surfaces. I turn my off. All it does is slow the motor down so your wheels if they are spinning they can get traction.

You need to check the brakes for worn pads, pads have a small piece of steel that will screech big time warning you that the pads need replace ment. but the fact that the ABS light is on may mean more is wrong with the brakes. If only the ABS light is on. It can still be driven to a shop.But if both the ABS and the Brake Warning lights are on, the car shouldn't be driven. Take the car to a shop to get the breaks repaired . If only the screeching noise was occuring, then you could replace the pads yourself. but the ABS light means that the brakes have some wrong other than just the pads.

if you notice the size of them , the bigger port is the high side , and the smaller of the 2 is the low side , you will add freon to the smaller port - the low / suction side .