At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: How to put a serpentine belt on a 2006 pontiac grand...
There is a tensioner pully that puts (tension) on the belt should have a 3/4 bolt when you apply pressure the belt will loosen just slip it off then the same to put it on
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
the power steering pump is mounted on the front of the motor, the pump has a lid which you unscrew to add fluid. if you cant find the pump follow the serpentine belt until it goes around the pump (large Pulley) with about a four or so inch long neck. Make sure you buy the fluid made for your vehicle.
you shouldnt have any allignment issues, assuming that the pully is good. if it needed to be replaced, you would know it. you would hear all kinds of odd noises...but my guess is that when the tension was put back on the belt, it was overlapping one of the edges on a pully farther down. just take a close look at where the belt is routed, and make sure that it is on its track on every pully. if not, release the tension, reallign, and tighten up again.
There should be a Belt Routing Sticker Under the Hood for Replacement. Or in the Back of the Owners Manual. If you need help getting it off, Let me Know!
×