Question about 2006 Ford F-250 Super Duty

1 Answer

Have Ford 250 Super Duty replaced battery and now when I reattached negative and positive cables the horn blows no stop and it wont start HELP

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An user who is expert in 3 categories / brands.

  • Master
  • 1,508 Answers

The horn blowing is probably the alarm , reset that and it should start

Posted on Feb 04, 2011

  • msgwsc Feb 04, 2011

    How do you reset alarm

  • gavin jones
    gavin jones Feb 04, 2011

    Sorry I dont know about that particular vehicle or what alarm system it might have, my toyota prado has a button on the console, or a button on the key , you could try locking the doors and unlocking, if you dont like your neighbours it will probably reset itself in 3-5 minutes of horn blowing



1 Suggested Answer


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Horn Blows non stop until it dies and then stops working 2006 F 250

Sounds like a short some place. Electrical, intermittent problems are hard to detect. Process of elimination.

Apr 16, 2014 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

How do replace alternator 06 f 250 6.0 l

I tried to find a tutorial video that could better show the process but I couldn't locate one in my database. Hopefully, my written instructions will suffice.

  1. Disconnect the negative battery cable.
  2. Rotate the drive belt tensioner away from the drive belt and remove the drive belt from the alternator pulley.
  3. Detach the electrical harness connectors at the alternator assembly.
  4. Disconnect the positive battery cable and remove the nut and washer.
  5. Remove 2 front alternator bolts.
  6. Remove the rear alternator support bracket retaining bolts and the support bracket.
  7. Remove the alternator from the vehicle.

To install:

  1. Place the alternator in position and loosely install 2 front alternator retaining bolts.
  2. Install the alternator bracket and 3 alternator bracket bolts. Tighten to 84 inch lbs. (10 Nm).
  3. Tighten 2 front alternator retaining bolts to 19 ft. lbs. (26 Nm).
  4. Connect 2 electrical harness connectors to the alternator assembly.
  5. Connect the positive battery cable and install the nut and washer. Tighten the nut to 72 inch lbs. (8 Nm).
  6. Rotate the drive belt tensioner away from the drive belt and install the drive belt on the alternator pulley.
  7. Connect the negative battery cable.
  8. Start the engine and check for proper charging system operation.

Jun 17, 2012 | 2008 Ford F 250 Super Duty 4WD

1 Answer

The horn just starts blowing. Where is the fuse located in theF250 Ford for the horn? Is there a fuse number? Is there a diagram that you can E-Mail me? Thanks

fuse 37 in the box under the hood. If you need a manual, there is a free download here:

May 08, 2011 | 2005 Ford F 250 Super Duty

1 Answer

2005 Ford F250 Disel horn starts blowing for no reason. It will stop when the truck is started. We do not know if the vehicle is capable of remote or not. How do we correct the horn problem and how do we...

there is an aftermarket alarm installed. pull the fuses and it will solve your problem. the vehicle should be capable of having remmotes if it has power locks

Apr 30, 2011 | 2005 Ford F 250 Super Duty

2 Answers

Have Ford 250 Super Duty replaced battery and now when I reattached negative and positive cables the horn blows and does not stop and it wont start

Welcome to

Check the horn button or relay.

Thank you for Using

Kind Regards, Lee

Your FixYa Expert and Master Technician

Feb 04, 2011 | 2006 Ford F-250 Super Duty

1 Answer

Just put a new battery and starter on my ford ranger and it still wont start....lights wont come on nor will my horn blow...what else could it be

Look at the starter relay, the positive battery cable goes from the battery to the relay to the starter. These do go bad. Also check the battery cable to see if tight( both positive and negative). and check to make sure the cables are good, and not broken. hope this helps

Jan 17, 2011 | Ford Ranger Cars & Trucks

1 Answer

I have a 1999 ford f350 ford 4x4 7.3 the horn starts blowing

there is a short in the horn wiring, you may disconnect the horn relay, that the easiet thing to do. owners manual should have a layout of where the relay is. Steering wheel switches most likely.

Sep 24, 2009 | 2000 Ford F350 Super Duty Super Cab

Not finding what you are looking for?
2006 Ford F-250 Super Duty Logo

351 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides