2000 oldsmobile alero gl 2.4 l engine, passenger window fell off the track. Removed door panel and white plastic clip is broken. Window won't stay up. What parts do I need? How do I fix it/

Replacement clips are available through specialty auto parts stores...there are many tricks or solvents that will loosen the glue on the broken clip...if you damage the glass, you can find a popular window replacement, inspect the clip too, at your nearby salvage yard or online...Hope this helps.

it can be ordered @ autozone window regulator comes with cable assembly

In the door handle there is a small plastic piece that pops out with a screw driver.

then there are 2 philips screws you take out.

then undo the wires from your door locks and windows and pull from the bottom of the door it should pop off.

SOUND LIKE ITS THE PLASTIC FRAME BROKE TO WINDOW MOTOR AND REGULATOR THAT HOLD GLASS IN PLACE.YOU HAVE TO GO TO DEALERSHIP BODY SHOP PARTS DEPARTMENT.

The Regulator will fix the problem. The tracks might also need a little adjustment.(loosen bolts move track then retighten) Try holding the window while you are rasing it you might be able to guide it up so that it will close a bit more.

this link is for a Grand Am but the door panels are very close and it should work.
http://www.a1electric.com/install/grand/grandam-2.htm

Their is a separate motor for each window. The least expensive fix is to replace the entire track assembly and motor. This is not a big job if you have done it before but it could be if you are not mechanical.

first remove the door panel there are three screws that need to be removed first 2 under the inside door handle and 1 on the lower left hand side behind a reflector then pull off the panel it will be held on by push clips, once inside move the plastic weather bearrer to the side ,run the window half way down you should see 2 window holding brackets pull the window up so you can drop it in the brackets, first get some black window adhesive fill the brackets with adhesive put window in brackets and roll it up and leave it up for 24 hrs.If the brackets are broken you will have to replace the whole window motor assemly which you can get on line for 89.00 not the 250.00 at dealer and you can install it yourself its easy to do.

take off inner door panel, lower track and put the window back in. If parts on track are broken buy new ones. Use urathain to reinstall window.

Is this what it lookes like? I found these at O'Rileys. I have the same problem.


DORMAN/HELP - Window Guide Item No: 38480 $9.79 per Card 1 Per Vehicle 1 year limited warranty (View Details) SASH KIT FRONT & REAR