I have a 2008 toyota tacoma Prerunner. when I use the alarm remote to lock the doors, all doors close except the front driver side. I also noticed that no sound is made when i arm or disarm the alarm. When locking the doors by using the automatic door locks in driver side, all doors lock exept the driver's side. Don't hear a sound like its trying to lock. Any advice?

David Burbee

• 1871 Answers
• Posted on Feb 01, 2011

SOURCE: I have a 2008 toyota tacoma Prerunner. when I use

Hello! There is a Technical Service Bulletin # EL009-07 that addresses programing the door lock remote...Your dealer should have a copy...I mention the TSB up front as a possible solution to the problem...However I believe the drivers side Door Lock Assembly is defective or the wiring to the switch/motor is open...The assembly has a 4 pin connector...White/Red and White/Black are the switch contacts... Blue/Black and Blue/Red are the lock drive motor...If you have the expertise, gain access to the assembly and inspect the connector and test with a multimeter...If you are not comfortable doing that I would replace the assembly...

Guru............Saailer

I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...