I have 2008 gmc searria and i got a code off of it the codeis p0336 i was just wanting to know what it is

DTC P1516
Throttle Actuator Control (TAC) Module Throttle Actuator Position Performance
DTC P1518
Throttle Actuator Control (TAC) Module Serial Data Circuit
DTC P0120
Throttle Position (TP) Sensor 1 Circuit
DTC P0220
Throttle Position (TP) Sensor 2 Circuit
DTC P0336
Crankshaft Position (CKP) Sensor Performance
DTC P0463
Fuel Level Sensor Circuit High Voltage
DTC U1001-U1254
Loss of Communications

Use new parts not used . What would be better - take it to a qualified repair shop.

P0336 Crankshaft Position Sensor Range/Performance

www.obd-codes.com/p0336
Detailed information on troubleshooting and repairing a P0336 DTC code which has to do ... This diagnostic trouble code (DTC) is a generic powertrain code.

engine and engine cooling system i would overflow bottle level first my need to be topped up engine may want to be drawing in coolant but none in reservoir if not this issue search on line p2138 code gmc serria 2008 2500hd there are couple sites with different info

you need obd scanner to reset and see if comes back- if it does come back with code , post again

1-8-4-3-6-5-7-2 # 1 is just left of center at front of cap

which crank sensor do you replaced ? the P0336 means P0336 Crankshaft Position Sensor A Circuit Range/Performance.

________________
autel maxidas 708

I'm sure the question is WHERE is the valve located

Hi.

p0336 means CKP sensor performance error. Replace the crankshaft position sensor. If that doesn't fix the issue there is a number of GM factory service bulletins that point at a manufacturing problem with Yukon engine. Find the appropriate service bulletin for your engine in this page.

Regards.

Ginko

maybe but have the case serviced with new fluid or do it yourself then clean the leak area and when it dries spray foot powder on the area then after a week you can see exactly where the leak is

Are you sure it is po 1336 or is it P0336? Here is info for P0336 DTC Number P0336 DTC Name Crankshaft Position Sensor "A" Circuit Range/Performance