-
Volkswagen Master
6,826 Answers
- Posted on Jan 28, 2011
Re: What type of trans. fluid does it take and how do i...
Transmission Fluid
Fluid Level Checking & Filling
To Check:
- Connect a scan tool to the vehicle to read ATF temperature. ATF checking temperature should be 95° - 113°F (35° - 45°C).
- Start the engine.
- Raise and safely support the vehicle.
- Place a drain pan under the transmission.
- Allow the ATF temperature to reach 95° - 113°F (35° - 45°C).
Automatic transmission fluid inspection plug
- Remove the inspection plug from the transmission housing. Fluid is pipe will run out. If fluid continues to drip out, no additional fluid is needed. If only the fluid in the overflow pipe runs out, additional fluid is needed.
To Fill:
Automatic transmission fluid filler pipe
- Pry the cap from the filler pipe. The cap locking device will be destroyed during removal.
- Pull the plug from the filler pipe.
- Add fluid slowly with VAG 1924 or equivalent until fluid runs out of the inspection hole. Install the inspection hole plug.
- Install the plug in the filler pipe and secure with a new cap.
×