I have a 95 k2500 350 just put in a new tranny and less than 90days later there is little to no pressure. Thinking it is a bad pump but could be the ecu thing as well since the previous tranny went out the same way. If you know where to locate it any help would be great! c = 2wd k = 4wd
Check your CPU. Might need to be replaced.
Yea. Basically the trucks little computer. I'm sorry I'm not too familiar with 95' Chevy but there is a computer for it and it is probably dying out. Usually in situations like the one your having would be Computer related. CPU = Central Processing Unit -or- ECU = Electronic Control Unit. You are going to be looking for a box where most of the wires are headed to (not the fuse box) and replace it. Usually a Copper or Silver color box. This is easy to replace... once you find it. All you have to do is unplug the connectors and plug them into a new unit.
I hope this helps.
×
719 views
Usually answered in minutes!
Sorry, not exactly sure what you mean. An ECM?
Thanks
Thanks!
As it turns out, it was an ignition module. Not anything to do with the ignition (where the key goes in) but a wire harness in the steering column. Who knew?
Trying to remove the dash and the manual gear shift lever is in the way. How do I remove it?
×