Were do I add transmission fluid on 97 nissan truck xe with 2.4 L engine. Automatic transmission...

On the passenger side behind the engine along the bell housing. Try looking there

Use Nissan Altima Automatic Transmission Fluid and it should hold about 10 quarts total. I would fill with 9 quarts and start the engine and circulate the fluid. Check the fluid level and add what you need.

No reservoir,it goes in where the dip stick is,remove and put a funnel in hole and add,always check when engine is running and in park.

Depends on your engine.

1980 JEEP CJ-7 2.5L 4-cyl Engine Code [B]
CAPACITIES
Engine, GM without filter..........2.4 quarts[1]
Wix Filter ........ 51040
Cooling System, Initial Fill..........8.0 quarts
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A999, 32RH..........8.4 quarts
3 speed A904, 30RH..........7.0 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Oil Drain Plug.....25 ft-lbs
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

1980 JEEP CJ-7 4.2L 6-cyl Engine Code [C]
CAPACITIES
Engine, without filter..........5.0 quarts[1]
Wix Filter..... 51522
Cooling System, Initial Fill..........11.0 quarts
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A999, 32RH..........8.4 quarts
3 speed A904, 30RH..........7.0 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Oil Drain Plug.....30 ft-lbs
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

1980 JEEP CJ-7 5.0L 8-cyl Engine Code [H]
CAPACITIES
Engine, without filter..........4.0 quarts[1]
Wix Filter..... 51258
Cooling System, Initial Fill..........13.0 quarts
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A904, 30RH..........7.0 quarts
3 speed A999, 32RH..........8.4 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

Oilman

plugs and wires

Dexron 11 went out of production about 1992

If you have to add,common sense tells you
that it is leaking,work on that issue

The brand don't matte,r but the specification does
I would put that question into your search engine
and also check with a dealer,as the current dex is not good
for your vehicle,only the latest GM veh. The Dex/Merc maybe, but the Multi Vehicle
may also be for Asian Vehicles.
Trying to help, but the exact spec I don't know
Also any trans repair shop will happily tell you

Transmission Fluid Replacement Replace transmission fluid as follows:

1. Operate engine until reaching operating temperature.
2. Turn OFF engine.
3. Remove the drain plug.
4. Drain the transmission fluid into a suitable container.
5. Install drain plug.
   • Torque to: 22-29 lb-ft. (29-39 Nm)
6. Refill fluid to specified level.

Fluid Type Specifications 4 Speed Automatic Transmission - Nissan Matic "D"
5 Speed Automatic Transmission - Nissan Matic "K"
NOTE: Using Automatic Transmission fluid other than Genuine Nissan ATF will cause deterioration in driveability and automatic transmission durability, and may damage the automatic transmission, which is not covered by the NISSAN new vehicle limited warranty

all trans. take dex 2 or dex 3     with your nissan being a 95 i would say dex 3 my friend.    dextron 3 is like dot 3 brake fluid it mixes with all fluids of its class.   

good luck
Jason

Dipstick is to the left of the engine. Should be a small yellow dipstick. Add fluid through the dipstick hole. The vehicle should be running when you do this. It is best to have driven at least 20 miles before adding trans fluid so everything has had time to get hot.

is it a manual or automatic?if it's manual check clutch.if it is automatic check transmission fluid.