Question about 1993 Ford Explorer Limited

1 Answer

How to change front wiper motor on 1993 ford explorer

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 157 Answers

Hi there,

  • Turn the ignition on, and turn the front windshield wipers on. When the wipers are facing straight up on the window, turn the ignition off so they remain in that position.
  • Disconnect the negative battery cable with an adjustable wrench. Remove the passenger side wiper blade assembly, by removing the pivot nut at the bottom with an adjustable wrench. Remove the wiper linkage access cover, and use a screwdriver to remove the wiper motor clip. Remove the wiper linkage from the wiper motor.
  • Disconnect the electrical connector on the wiper motor. Remove the bolts and nuts, securing the wiper motor with a socket wrench. Remove the wiper motor from the vehicle. Install the new wiper motor, and tighten mounting bolts and nuts with a socket wrench. Connect the electrical harness to the new wiper motor. Connect the wiper linkage, and insert the linkage clip. Install the wiper blade assembly, and tighten the nut with an adjustable wrench.
  • Connect the negative battery cable securely, using an adjustable wrench.
Hope this helps...

Posted on Jan 24, 2011

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Ford explorer 1998 rear washer doesnt work but wipers and motor do any suggestions


unhook the hose at the rear wiper,test, maybe the nozzle is plugged, or hose bent.

Aug 25, 2012 | 1998 Ford Explorer

1 Answer

My 2000 ford explorer's front wipers do not work, but i hear the wiper motor running


They have become disconnected somehow. Maybe stripped the spline on the motor or something inside the motor.

Oct 03, 2011 | 2000 Ford Explorer

3 Answers

1999 ford explorer rear wiper don't work


hi there
this is pretty typicalof rear wipers check fuse first to make sure it is good if that doesnt work it is probably the motor which goes out and you can pick one up at your local auto parts store hope this will help you and have a great day

Aug 21, 2011 | 1999 Ford Explorer

2 Answers

I have a 93 explorer the wipers won.t work except on high i replaced the wiper motor and themultifunction switch still the same problem


I have a 95 explorer ... intermittent wiper and park not working. Hi and low works good. I replaced wiper run/park relay (R3146) Advance Auto Parts. Location underhood power distribution box left side outboard of brake fluid reservoir.

a509311a-feb1-4872-8ea1-574c7a46f61a.jpg


45520467-3945-4afd-b2e7-26319b5e36d4.jpg

Apr 14, 2011 | 1993 Ford Explorer Limited

3 Answers

Wiper problem 2002 ford explorer. Motor energizes, but wipers won't move unless you give them a "shove". How do you access the wiper drive system ? Thanks


it is problem with linkage of motor , you have to lubricate it then try once, but the motor is gone weak so it not pushing that linkage, you just try with lubricating that linkage that connected to wiper motor to wiper arm, if it work you saved your money or do replace the motor assy.

Jan 24, 2010 | 2002 Ford Explorer

1 Answer

Wiper motor quit working


does the motor not run? check the operation rods connected to the arms and the motor, see if they are bent

Apr 07, 2009 | 1993 Ford Explorer Limited

2 Answers

I have a1992 ford explorer the front and rear wipers quit workin


check for power at the wiper motor. If power at the wiper motor but no wiper action then replace the motor. if no power at the motor then use a jumper wire and put power to the motor. Does motor run? if so check for open circuit in the wire someplace.

Dec 27, 2008 | 1992 Ford Explorer

Not finding what you are looking for?
1993 Ford Explorer Limited Logo

792 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...